BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278077BTC
Stokta
A-Tech
A-Tech 8GB DDR4 2666MHz CL19 260-Pin SODIMM PNY MN8GSD42666 1Rx8 Laptop RAM
8GB DDR4 2666MHz CL19 SODIMM laptop memory upgrade at 1.2V for PNY MN8GSD42666 compatibility
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 8GB capacity lets you run more apps simultaneously
- DDR4 2666MHz speed accelerates data transfer for snappier response
- CL19 latency keeps timing tight for stable operation
- 2V standard voltage reduces power draw and heat
- 260-pin SODIMM form factor fits compatible laptop slots
What this module is and who it fits
This A-Tech module is an 8GB DDR4 SO-DIMM built as a direct replacement for the PNY MN8GSD42666 part. It runs at 2666MHz with CL19 latency at the standard 1.20V and uses a 260-pin unbuffered, non-ECC layout. The stick is designed for laptops, notebooks and all-in-one systems that accept DDR4 SO-DIMM memory.
Who should buy it and who should not
Buyers needing a single 8GB DDR4 2666MHz SODIMM to replace a failed PNY module or to add capacity to a compatible slot will find this part matches the factory specifications. Systems that require ECC, registered memory, a different voltage, a different pin count, or a speed other than 2666MHz cannot use this module.
The specification that decides fit
The module is a 260-pin DDR4 SO-DIMM operating at 2666MHz (PC4-21300) with CL19 timing at 1.20V in a 1Rx8 unbuffered, non-ECC configuration. If your laptop's memory slot and BIOS support this exact combination, the part will work; otherwise it will not seat or post.
Öne çıkanlar
- 8GB capacity lets you run more apps simultaneously
- DDR4 2666MHz speed accelerates data transfer for snappier response
- CL19 latency keeps timing tight for stable operation
- 2V standard voltage reduces power draw and heat
- 260-pin SODIMM form factor fits compatible laptop slots
Teknik özellikler
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for PNY |
| Model | MN8GSD42666 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | MN8GSD42666 |
| Recommend Use | Compatible Replacement for PNY MN8GSD42666 |
Bu ürünle ilgili sorular
Will this 260-pin DDR4 SODIMM fit the same slot as the original PNY MN8GSD42666 module?
Yes, it matches the 260-pin DDR4 SO-DIMM form factor and is specified as a compatible replacement for the PNY MN8GSD42666.
If I install this CL19 module alongside an existing stick, will the system run both at the slower latency?
The system will operate all installed modules at the lowest common speed and latency, so this CL19 stick will run at whatever timing the slowest module requires.
How can I confirm the new 8GB module is recognised at 2666 MHz after installation?
Check the memory speed in Task Manager's Performance tab or run CPU-Z to verify the module reports DDR4-2666 (PC4-21300) and the full 8GB capacity.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
