Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips, 260 gold pins, no heat spreader

A-Tech

A-Tech 8GB DDR4 2666MHz CL19 260-Pin SODIMM PNY MN8GSD42666 1Rx8 Laptop RAM

SKU CH-PQYT-02A9N

8GB DDR4 2666MHz CL19 SODIMM laptop memory upgrade at 1.2V for PNY MN8GSD42666 compatibility

  • Capacity8GB
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 8GB capacity lets you run more apps simultaneously
  • DDR4 2666MHz speed accelerates data transfer for snappier response
  • CL19 latency keeps timing tight for stable operation
  • 2V standard voltage reduces power draw and heat
  • 260-pin SODIMM form factor fits compatible laptop slots

What this module is and who it fits

This A-Tech module is an 8GB DDR4 SO-DIMM built as a direct replacement for the PNY MN8GSD42666 part. It runs at 2666MHz with CL19 latency at the standard 1.20V and uses a 260-pin unbuffered, non-ECC layout. The stick is designed for laptops, notebooks and all-in-one systems that accept DDR4 SO-DIMM memory.

Who should buy it and who should not

Buyers needing a single 8GB DDR4 2666MHz SODIMM to replace a failed PNY module or to add capacity to a compatible slot will find this part matches the factory specifications. Systems that require ECC, registered memory, a different voltage, a different pin count, or a speed other than 2666MHz cannot use this module.

The specification that decides fit

The module is a 260-pin DDR4 SO-DIMM operating at 2666MHz (PC4-21300) with CL19 timing at 1.20V in a 1Rx8 unbuffered, non-ECC configuration. If your laptop's memory slot and BIOS support this exact combination, the part will work; otherwise it will not seat or post.

Helstu kostir

  • 8GB capacity lets you run more apps simultaneously
  • DDR4 2666MHz speed accelerates data transfer for snappier response
  • CL19 latency keeps timing tight for stable operation
  • 2V standard voltage reduces power draw and heat
  • 260-pin SODIMM form factor fits compatible laptop slots

Tæknilýsing

BrandA-Tech
SeriesCompatible Replacement for PNY
ModelMN8GSD42666
Capacity8GB
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMN8GSD42666
Recommend UseCompatible Replacement for PNY MN8GSD42666

Spurningar um þessa vöru

Will this 260-pin DDR4 SODIMM fit the same slot as the original PNY MN8GSD42666 module?

Yes, it matches the 260-pin DDR4 SO-DIMM form factor and is specified as a compatible replacement for the PNY MN8GSD42666.

If I install this CL19 module alongside an existing stick, will the system run both at the slower latency?

The system will operate all installed modules at the lowest common speed and latency, so this CL19 stick will run at whatever timing the slowest module requires.

How can I confirm the new 8GB module is recognised at 2666 MHz after installation?

Check the memory speed in Task Manager's Performance tab or run CPU-Z to verify the module reports DDR4-2666 (PC4-21300) and the full 8GB capacity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.