Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

Buffalo Technology

Buffalo Technology OP-HD3.0T/4K-3Y 3TB SATA 3.5" internal hard drive

SKU CH-1S5E-X81V0 MPN OP-HD3.0T/4K-3Y

3 TB internal hard drive with a SATA 3.0 Gbit/s interface, 3.5 inch form factor and three-year warranty for Buffalo TeraStation arrays

  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • FeaturesCompatibility: Buffalo Storage Arrays: TeraStation ES TeraSt
  • Form Factor3.5"
  • 3 TB capacity for large NAS storage arrays
  • SATA 3.0 Gbit/s interface delivers 384 MB/s transfer rate
  • Validated for TeraStation ES, III, Pro and Pro WSS models
  • 5-inch form factor with 1.2-inch height fits standard bays
  • RoHS certified and backed by a three-year limited warranty

TeraStation 3 TB SATA drive

This Buffalo OP-HD3.0T/4K-3Y is a 3 TB internal hard drive built for 3.5-inch bays. It connects through a SATA 3.0Gb/s interface and uses 4K sector formatting. The drive is qualified for Buffalo TeraStation ES, III, III iSCSI, Pro and Pro WSS arrays.

For RAID replacements in listed arrays

It suits administrators who need a direct replacement or capacity upgrade inside a compatible TeraStation. Buyers who want a standalone desktop drive for a non-TeraStation system should look at something else, as the firmware is tuned for array use.

SATA 3.0Gb/s interface

The drive communicates over a SATA 300 connection with a maximum external transfer rate of 384 MB/s. This single interface specification determines whether the drive will install and operate in the target enclosure.

Öne çıkanlar

  • 3 TB capacity for large NAS storage arrays
  • SATA 3.0 Gbit/s interface delivers 384 MB/s transfer rate
  • Validated for TeraStation ES, III, Pro and Pro WSS models
  • 5-inch form factor with 1.2-inch height fits standard bays
  • RoHS certified and backed by a three-year limited warranty

Teknik özellikler

BrandBUFFALO
ModelOP-HD3.0T/4K-3Y
InterfaceSATA 3.0Gb/s
Capacity3TB
FeaturesCompatibility:
Buffalo Storage Arrays:
TeraStation ES
TeraStation III
TeraStation III iSCSI
TeraStation Pro
TeraStation Pro WSS
Form Factor3.5"
Kargo ağırlığı1.36 kg
Koli boyutu178 × 127 × 51 mm

Bu ürünle ilgili sorular

Does this drive need a SATA 3.0Gb/s port on the motherboard or RAID controller to work?

Yes, it connects through a standard 7-pin SATA interface running at 3.0Gb/s, so the host must provide a matching SATA port.

Can I mix this 3 TB drive with smaller drives already in my TeraStation RAID array?

The drive will appear at the size of the smallest drive in the array, so it can replace a failed smaller unit but will not add extra usable capacity.

How can I verify the drive is transferring at its rated 384 MB/s after installation?

Run a sequential read benchmark such as CrystalDiskMark or HD Tune; a healthy drive on a 3 Gbit/s link should show sustained speeds near 384 MB/s.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.