Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Silver 3.5 inch internal hard drive rectangular metal casing

Buffalo Technology

Buffalo Technology OP-HD3.0T/4K-3Y 3TB SATA 3.5" internal hard drive

SKU CH-1S5E-X81V0 MPN OP-HD3.0T/4K-3Y

3 TB internal hard drive with a SATA 3.0 Gbit/s interface, 3.5 inch form factor and three-year warranty for Buffalo TeraStation arrays

  • InterfaceSATA 3.0Gb/s
  • Capacity3TB
  • FeaturesCompatibility: Buffalo Storage Arrays: TeraStation ES TeraSt
  • Form Factor3.5"
  • 3 TB capacity for large NAS storage arrays
  • SATA 3.0 Gbit/s interface delivers 384 MB/s transfer rate
  • Validated for TeraStation ES, III, Pro and Pro WSS models
  • 5-inch form factor with 1.2-inch height fits standard bays
  • RoHS certified and backed by a three-year limited warranty

TeraStation 3 TB SATA drive

This Buffalo OP-HD3.0T/4K-3Y is a 3 TB internal hard drive built for 3.5-inch bays. It connects through a SATA 3.0Gb/s interface and uses 4K sector formatting. The drive is qualified for Buffalo TeraStation ES, III, III iSCSI, Pro and Pro WSS arrays.

For RAID replacements in listed arrays

It suits administrators who need a direct replacement or capacity upgrade inside a compatible TeraStation. Buyers who want a standalone desktop drive for a non-TeraStation system should look at something else, as the firmware is tuned for array use.

SATA 3.0Gb/s interface

The drive communicates over a SATA 300 connection with a maximum external transfer rate of 384 MB/s. This single interface specification determines whether the drive will install and operate in the target enclosure.

Punti di forza

  • 3 TB capacity for large NAS storage arrays
  • SATA 3.0 Gbit/s interface delivers 384 MB/s transfer rate
  • Validated for TeraStation ES, III, Pro and Pro WSS models
  • 5-inch form factor with 1.2-inch height fits standard bays
  • RoHS certified and backed by a three-year limited warranty

Caratteristiche tecniche

BrandBUFFALO
ModelOP-HD3.0T/4K-3Y
InterfaceSATA 3.0Gb/s
Capacity3TB
FeaturesCompatibility:
Buffalo Storage Arrays:
TeraStation ES
TeraStation III
TeraStation III iSCSI
TeraStation Pro
TeraStation Pro WSS
Form Factor3.5"
Peso di spedizione1.36 kg
Dimensioni del pacco178 × 127 × 51 mm

Domande su questo articolo

Does this drive need a SATA 3.0Gb/s port on the motherboard or RAID controller to work?

Yes, it connects through a standard 7-pin SATA interface running at 3.0Gb/s, so the host must provide a matching SATA port.

Can I mix this 3 TB drive with smaller drives already in my TeraStation RAID array?

The drive will appear at the size of the smallest drive in the array, so it can replace a failed smaller unit but will not add extra usable capacity.

How can I verify the drive is transferring at its rated 384 MB/s after installation?

Run a sequential read benchmark such as CrystalDiskMark or HD Tune; a healthy drive on a 3 Gbit/s link should show sustained speeds near 384 MB/s.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.