SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00501908BTC
Stokta
Computer Memory Solutions
Computer Memory Solutions CM2048642400DIMM 32GB (2 x 16GB) DDR4 2400MHz CL17 1.2V non-ECC DIMM memory upgrade
32 GB dual-channel DDR4 kit rated at 2400 MHz CL17 for HP EliteDesk 705 G3 and 800 G2/G3 desktops
- Capacity32GB (2 x 16GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- Guaranteed compatibility with listed HP EliteDesk models
- 32GB dual-channel kit for multitasking headroom
- DDR4 2400MHz CL17 for responsive performance
- Low 1.2V voltage reduces power draw
- Unbuffered non-ECC DIMMs install without configuration
Targeted Upgrade Kit
This 32GB kit contains two 16GB DDR4 DIMMs validated for HP EliteDesk 705 G3 and 800 G2 or G3 tower and small-form-factor desktops. It is built for IT teams and owners of those specific workstations who need the maximum supported memory without trial-and-error compatibility testing. Buyers whose systems use a different DDR generation or require ECC registered modules cannot use this product.
Standard Voltage Operation
Each module runs at the JEDEC standard 1.2V with CL17 17-17-17 timings at 2400MHz. The unbuffered non-ECC design draws typical DDR4 power and produces no additional acoustic load beyond the system’s existing airflow. No heat spreader is fitted, so the sticks rely on case ventilation that the supported EliteDesk chassis already provide.
Plug-and-Play Simplicity
The two sticks ship ready to install with no configuration utilities, firmware updates or driver packages required. The manufacturer’s lifetime exchange covers manufacturing defects when purchased directly, but the kit itself adds no software layer or monitoring tools. Users simply seat the modules in the available slots and the platform recognises the capacity at the rated speed.
Öne çıkanlar
- Guaranteed compatibility with listed HP EliteDesk models
- 32GB dual-channel kit for multitasking headroom
- DDR4 2400MHz CL17 for responsive performance
- Low 1.2V voltage reduces power draw
- Unbuffered non-ECC DIMMs install without configuration
Teknik özellikler
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq Elitedesk 705 G3 MT/SFF, 800 G2 Series Tower/SFF, 800 G3 Series Tower/SFF |
| Package Content | 2 Memory RAM Sticks |
Bu ürünle ilgili sorular
How do I install the 288-pin DIMM modules and what step is often missed?
Power off the HP EliteDesk, open the chassis, align the notch on each 288-pin DDR4 stick with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB modules are detected at 2400 MHz.
What maintenance or replacement will the memory need later?
No scheduled maintenance is required; the modules carry a limited lifetime warranty from Computer Memory Solutions and only need replacement if a manufacturing defect appears or a future upgrade exceeds the 64 GB system maximum.
What limit appears first under sustained heavy workloads?
The platform caps total memory at 64 GB across four slots, so this 32 GB kit leaves room for one more 2 x 16 GB upgrade before the hard ceiling is reached.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
