We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 DIMM sticks, no heat spreader, 288-pin

Computer Memory Solutions

Computer Memory Solutions CM2048642400DIMM 32GB (2 x 16GB) DDR4 2400MHz CL17 1.2V non-ECC DIMM memory upgrade

SKU CH-Q4TA-BPXDD

32 GB dual-channel DDR4 kit rated at 2400 MHz CL17 for HP EliteDesk 705 G3 and 800 G2/G3 desktops

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • Guaranteed compatibility with listed HP EliteDesk models
  • 32GB dual-channel kit for multitasking headroom
  • DDR4 2400MHz CL17 for responsive performance
  • Low 1.2V voltage reduces power draw
  • Unbuffered non-ECC DIMMs install without configuration

Targeted Upgrade Kit

This 32GB kit contains two 16GB DDR4 DIMMs validated for HP EliteDesk 705 G3 and 800 G2 or G3 tower and small-form-factor desktops. It is built for IT teams and owners of those specific workstations who need the maximum supported memory without trial-and-error compatibility testing. Buyers whose systems use a different DDR generation or require ECC registered modules cannot use this product.

Standard Voltage Operation

Each module runs at the JEDEC standard 1.2V with CL17 17-17-17 timings at 2400MHz. The unbuffered non-ECC design draws typical DDR4 power and produces no additional acoustic load beyond the system’s existing airflow. No heat spreader is fitted, so the sticks rely on case ventilation that the supported EliteDesk chassis already provide.

Plug-and-Play Simplicity

The two sticks ship ready to install with no configuration utilities, firmware updates or driver packages required. The manufacturer’s lifetime exchange covers manufacturing defects when purchased directly, but the kit itself adds no software layer or monitoring tools. Users simply seat the modules in the available slots and the platform recognises the capacity at the rated speed.

Highlights

  • Guaranteed compatibility with listed HP EliteDesk models
  • 32GB dual-channel kit for multitasking headroom
  • DDR4 2400MHz CL17 for responsive performance
  • Low 1.2V voltage reduces power draw
  • Unbuffered non-ECC DIMMs install without configuration

Specifications

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP/Compaq Elitedesk 705 G3 MT/SFF, 800 G2 Series Tower/SFF, 800 G3 Series Tower/SFF
Package Content2 Memory RAM Sticks

Questions about this item

How do I install the 288-pin DIMM modules and what step is often missed?

Power off the HP EliteDesk, open the chassis, align the notch on each 288-pin DDR4 stick with the slot key, press firmly until both retention clips click, then verify in BIOS that both 16 GB modules are detected at 2400 MHz.

What maintenance or replacement will the memory need later?

No scheduled maintenance is required; the modules carry a limited lifetime warranty from Computer Memory Solutions and only need replacement if a manufacturing defect appears or a future upgrade exceeds the 64 GB system maximum.

What limit appears first under sustained heavy workloads?

The platform caps total memory at 64 GB across four slots, so this 32 GB kit leaves room for one more 2 x 16 GB upgrade before the hard ceiling is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.