FANXIANG
FANXIANG S500 512GB M.2 2280 NVMe internal SSD
- Internal Solid Stat…
- Consumer
$63,99
0.00082364BTC
Stokta
FANXIANG
FANXIANG S500 256GB M.2 2280 NVMe internal SSD
M.2 2280 NVMe SSD with 256 GB capacity, PCIe 3.0 x4 interface and up to 2800 MB/s sequential read
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity256GB
- Memory Components3D NAND TLC
- InterfacePCI-Express 3.0 x4
Options 256GB
- 512GB
- 256GB
- Up to 2800 MB/s sequential read accelerates boot and load times
- Up to 2000 MB/s sequential write speeds up large file transfers
- 3D NAND TLC flash delivers higher endurance than QLC alternatives
- 160 TBW rating supports heavy daily workloads for years
- M.2 2280 form factor fits laptops and desktops with PCIe 3.0 slots
PCIe 3.0 NVMe 256GB
The FANXIANG S500 256GB is an M.2 2280 internal SSD using a PCIe 3.0 x4 interface and 3D NAND TLC flash. It targets everyday computing workloads on laptops and desktops that support NVMe. The drive delivers up to 2800 MB/s sequential read and 2000 MB/s sequential write. Rated endurance is 160 TBW with a 2,000,000-hour MTBF.
Sustained thermal behaviour
Without a heatsink the controller relies on the motherboard slot airflow to shed heat during long writes. The 4.00 mm single-sided profile keeps the drive within the 0 °C to 70 °C operating window in typical chassis. LDPC error correction and wear-leveling maintain data integrity as temperatures rise. Performance remains consistent until thermal limits trigger throttling.
Upgrade from SATA SSDs
Replacing a 2.5-inch SATA SSD with this NVMe drive removes the 6 Gb/s bottleneck and cuts boot and application load times. The jump is worth it when the platform has an M.2 2280 slot wired for PCIe 3.0 x4 and the user needs 256 GB of low-latency storage. Older systems limited to SATA or PCIe 2.0 will not see the full speed benefit.
Öne çıkanlar
- Up to 2800 MB/s sequential read accelerates boot and load times
- Up to 2000 MB/s sequential write speeds up large file transfers
- 3D NAND TLC flash delivers higher endurance than QLC alternatives
- 160 TBW rating supports heavy daily workloads for years
- M.2 2280 form factor fits laptops and desktops with PCIe 3.0 slots
Teknik özellikler
| Brand | FANXIANG |
|---|---|
| Series | S500 Pro |
| Model | S500 Pro |
| Part Number | S500 Pro-256GB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | 3D NAND TLC |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 2800MBps |
| Max Sequential Write | Up to 2000MBps |
| Terabytes Written (TBW) | 160 |
| MTBF | 2,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -45°C ~ +85°C |
| Height | 4.00mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8g |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
Will this drive fit in a standard laptop M.2 2280 slot?
Yes, the drive uses the M.2 2280 form factor measuring 22.00mm wide by 80.00mm long and 4.00mm tall, matching the standard slot dimensions.
Does the 256GB model reach the 3500MB/s read speed mentioned in the highlights?
No, the 256GB capacity is rated for up to 2800MB/s sequential read and 2000MB/s sequential write; the higher 3500MB/s figure applies to the 1TB model.
Is a heatsink required for this SSD in a typical desktop build?
The drive ships without a heatsink and is rated for 0°C to 70°C operating temperature; most motherboards provide sufficient airflow, but a motherboard heatsink can be added if desired.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
