FANXIANG
FANXIANG S501Q 512GB PCIe 3.0 x4 NVMe M.2 2280 internal SSD
- Internal Solid Stat…
- Consumer
$64,99
0.00083725BTC
Stokta
FANXIANG
FANXIANG S501Q 2TB PCIe 3.0 x4 NVMe internal SSD
A 2TB M.2 2280 NVMe drive with PCIe 3.0 x4, 3600 MB/s read and 2700 MB/s write, 640 TBW endurance and graphite cooling stickers
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory ComponentsQLC
- InterfacePCI-Express 3.0 x4
- Up to 3600 MB/s sequential read accelerates boot and load times
- Up to 2700 MB/s sequential write speeds file saves and transfers
- 640 TBW endurance rating supports heavy daily workloads
- 1,500,000-hour MTBF indicates long-term reliability
- Graphite heat-dissipation stickers help maintain performance under load
Capacity and interface
The FANXIANG S501Q is a 2TB internal SSD built on the M.2 2280 form factor and a PCI-Express 3.0 x4 NVMe link. It targets laptop and desktop users who want a large, single-volume upgrade for everyday workloads and game libraries.
Sustained write behaviour
The drive uses 3D NAND QLC with an SLC cache to absorb burst traffic, then settles to the native QLC write rate once the cache fills. Its 640TB TBW rating and 1,500,000-hour MTBF reflect the endurance envelope for long-term mixed read and write activity.
Thermals and power
A graphite heat-dissipation sticker is included to spread heat across the controller and NAND packages. The drive is rated for 0°C to 70°C operating temperature and -25°C to 85°C storage temperature, indicating typical power draw and thermal output for a Gen 3 x4 NVMe device without a dedicated heatsink.
Öne çıkanlar
- Up to 3600 MB/s sequential read accelerates boot and load times
- Up to 2700 MB/s sequential write speeds file saves and transfers
- 640 TBW endurance rating supports heavy daily workloads
- 1,500,000-hour MTBF indicates long-term reliability
- Graphite heat-dissipation stickers help maintain performance under load
Teknik özellikler
| Brand | FANXIANG |
|---|---|
| Series | S501Q |
| Model | S501Q |
| Part Number | S501Q-2TB |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | QLC |
| Interface | PCI-Express 3.0 x4 |
| Max Sequential Read | Up to 3600 MBps |
| Max Sequential Write | Up to 2700 MBps |
| Terabytes Written (TBW) | 640TB |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Features | M.2 2280 NVMe SSD PCIe Gen 3x4 |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -25°C ~ +85°C |
| Height | 2.40mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 8g |
| Package Content | S501Q M.2 NVMe SSD x1, Screwdriver x1, Screw x1 |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
FANXIANG
FANXIANG S501Q 1TB M.2 2280 PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
$121,99
0.00157157BTC
StoktaBu ürünle ilgili sorular
Does the 2 TB S501Q run hot or draw extra power during all‑day use?
The drive includes graphite heat‑dissipation stickers to control temperature, operates from 0 °C to 70 °C and uses the PCIe 3.0 x4 interface without a heatsink.
What must my motherboard provide for this M.2 2280 NVMe drive to work?
An M.2 slot wired for PCIe 3.0 x4 NVMe; the drive is 22 mm wide and 2.40 mm high.
Will this PCIe 3.0 x4 SSD run at full speed in a PCIe 2.0 slot?
It will function but speeds are limited to the PCIe 2.0 x4 ceiling, below the 3600 MB/s read and 2700 MB/s write ratings.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
