Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two red aluminum heatspreader DDR4 modules, 42 mm tall

G.SKILL

G.SKILL F4-2400C15D-32GVR 32GB (2x16GB) DDR4 2400 CL15 desktop RAM

SKU CH-PFHD-1MJ9H MPN F4-2400C15D-32GVR

A 32 GB dual-channel DDR4 kit with two 16 GB modules at 2400 MHz and CL15 latency

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Timing15-15-15-35
  • Voltage1.20V
  • 32 GB total capacity from two 16 GB modules
  • Dual-channel kit enables higher memory bandwidth
  • CL15 latency with 15-15-15-35 timings for responsive operation
  • Aluminium heatspreader keeps modules cool under load
  • Intel XMP 2.0 profile simplifies one-click overclocking

Ripjaws V 32 GB dual-channel kit

This G.SKILL Ripjaws V kit delivers 32 GB of DDR4 memory in two matched 16 GB modules. The modules run at DDR4 2400 with CL15 15-15-15-35 timings at 1.20 V. An aluminium heatspreader in red covers each stick. Intel XMP 2.0 support allows the rated profile to be loaded from the BIOS.

For Intel DDR4 platforms needing 32 GB at CL15

The kit is tested for Intel X99, X299, Z170, Z270, Z370, Z390, Z490, Z590 and Z690 DDR4 boards, and is also listed for AMD B550. Builders who need ECC, registered DIMMs, speeds above 2400 MHz or capacities beyond 32 GB should look at other memory lines. Mixing this kit with different modules is not recommended by the manufacturer.

CL15 at DDR4 2400 decides fit

The critical specification is CAS latency 15 at the rated 2400 MT/s speed with 1.20 V operation. If your platform requires tighter timings, higher frequency or lower voltage at this capacity, this kit will not meet that requirement.

Öne çıkanlar

  • 32 GB total capacity from two 16 GB modules
  • Dual-channel kit enables higher memory bandwidth
  • CL15 latency with 15-15-15-35 timings for responsive operation
  • Aluminium heatspreader keeps modules cool under load
  • Intel XMP 2.0 profile simplifies one-click overclocking

Teknik özellikler

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-2400C15D-32GVR
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Timing15-15-15-35
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorRed
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD B550
Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Kargo ağırlığı0.13 kg
Koli boyutu204 × 133 × 17 mm

Bu ürünle ilgili sorular

What comes in the box and do I need anything else to install the Ripjaws V 32GB kit?

The kit includes two 16GB 288‑pin DDR4 modules with red aluminum heat spreaders. No extra cables or brackets are required; install directly into compatible motherboard slots.

Should I choose this 2400 CL15 dual‑channel kit or a different speed or capacity for my build?

This 32GB (2×16GB) kit runs at 2400MHz with 15‑15‑15‑35 timings at 1.20V and supports Intel XMP 2.0. Pick it when your platform lists DDR4‑2400 and you want matched dual‑channel capacity.

What does the 2400MHz rating actually deliver once the RAM is in my system?

At default SPD the modules run at 2133MHz. Enabling the XMP 2.0 profile in BIOS sets them to the rated 2400MHz with CL15 timings at 1.20V, giving the advertised bandwidth on supported Intel chipsets.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.