BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
G.SKILL
A 32 GB dual-channel DDR4 kit with two 16 GB modules at 2400 MHz and CL15 latency
This G.SKILL Ripjaws V kit delivers 32 GB of DDR4 memory in two matched 16 GB modules. The modules run at DDR4 2400 with CL15 15-15-15-35 timings at 1.20 V. An aluminium heatspreader in red covers each stick. Intel XMP 2.0 support allows the rated profile to be loaded from the BIOS.
The kit is tested for Intel X99, X299, Z170, Z270, Z370, Z390, Z490, Z590 and Z690 DDR4 boards, and is also listed for AMD B550. Builders who need ECC, registered DIMMs, speeds above 2400 MHz or capacities beyond 32 GB should look at other memory lines. Mixing this kit with different modules is not recommended by the manufacturer.
The critical specification is CAS latency 15 at the rated 2400 MT/s speed with 1.20 V operation. If your platform requires tighter timings, higher frequency or lower voltage at this capacity, this kit will not meet that requirement.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-2400C15D-32GVR |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Timing | 15-15-15-35 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Red |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD B550 Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| Teža pošiljke | 0.13 kg |
| Velikost pošiljke | 204 × 133 × 17 mm |
The kit includes two 16GB 288‑pin DDR4 modules with red aluminum heat spreaders. No extra cables or brackets are required; install directly into compatible motherboard slots.
This 32GB (2×16GB) kit runs at 2400MHz with 15‑15‑15‑35 timings at 1.20V and supports Intel XMP 2.0. Pick it when your platform lists DDR4‑2400 and you want matched dual‑channel capacity.
At default SPD the modules run at 2133MHz. Enabling the XMP 2.0 profile in BIOS sets them to the rated 2400MHz with CL15 timings at 1.20V, giving the advertised bandwidth on supported Intel chipsets.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?