BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00275833BTC
Stokta
G.SKILL
G.SKILL F5-6400R3239G16GE8-G5 128GB (8 x 16GB) DDR5 6400 CL32 ECC Registered server RAM
Eight 16 GB DDR5 registered ECC modules at 6400 MT/s with CL32 timing for Intel Xeon W-3400X workstations
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL32
- Timing32-39-39-102
- Voltage1.40V
- 128 GB octa-channel kit scales memory bandwidth for heavy workloads
- DDR5 6400 MT/s rated speed feeds data to Xeon cores faster
- CL32 32-39-39-102 timings tighten latency for responsive compute
- ECC registered design corrects errors and stabilises signal integrity
- Intel XMP 3.0 profile enables rated overclock with one BIOS setting
Workstation DDR5 RDIMM kit
This G.SKILL G5 Series kit provides 128GB across eight 16GB DDR5 RDIMM modules. It targets professionals building Intel Xeon W-3400X workstations on W790 motherboards with eight-channel support. Registered operation and on-die plus side-band ECC protect data integrity in memory-intensive workloads.
Replaces standard JEDEC memory
The kit upgrades from baseline DDR5 speeds to DDR5 6400 (PC5 51200) with CL32-39-39-102 timings at 1.40V via Intel XMP 3.0. The jump is worthwhile when your W790 platform can run the XMP profile and your applications benefit from the extra bandwidth over standard registered DIMMs.
Sustained-load behaviour
Hand-screened ICs and individual module testing aim to keep the rated frequency and timings stable during extended rendering or compute sessions. A dedicated temperature sensor on each DIMM allows the platform to monitor thermal status under continuous load. No heat spreaders are fitted, so chassis airflow must handle the 1.40V operating voltage.
Öne çıkanlar
- 128 GB octa-channel kit scales memory bandwidth for heavy workloads
- DDR5 6400 MT/s rated speed feeds data to Xeon cores faster
- CL32 32-39-39-102 timings tighten latency for responsive compute
- ECC registered design corrects errors and stabilises signal integrity
- Intel XMP 3.0 profile enables rated overclock with one BIOS setting
Teknik özellikler
| Brand | G.SKILL |
|---|---|
| Series | G5 Series |
| Model | F5-6400R3239G16GE8-G5 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL32 |
| Timing | 32-39-39-102 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Octa Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Chipset | Intel W790 Series Chipset (w/ Octo-Channel Memory Support) |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Optimized for Intel Xeon W-3400X series processors Requires compatible Intel W790 chipset motherboard w/ 8-channel support On-die ECC & side-band ECC Dedicated temperature sensors Intel XMP 3.0 Support |
| Kargo ağırlığı | 0.17 kg |
| Koli boyutu | 244 × 178 × 36 mm |
Bu ürünle ilgili sorular
What motherboard slot and pin count do the 288-pin DDR5 RDIMMs require?
The modules use the standard 288-pin DDR5 RDIMM form factor and must be installed in a motherboard with matching DDR5 RDIMM slots.
How is the Intel XMP 3.0 profile enabled on the octa-channel kit?
Enter the BIOS on a compatible Intel W790 motherboard, select the XMP 3.0 profile, save and reboot; the rated 6400 MT/s speed and 32-39-39-102 timings apply only when XMP is active.
When should the registered ECC modules be reseated or replaced in a continuous-workstation?
Reseat if the system reports corrected ECC errors or fails to POST after thermal cycles; replace modules that show persistent uncorrectable errors or physical damage.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
