Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
White mid-tower PC case with tempered glass panels and dual-chamber layout

Geometric Future

Geometric Future M5 White Mid Tower PC Case

SKU CH-9AYD-E1TAB

White mid-tower case fits E-ATX boards, 460 mm graphics cards and 420 mm radiators with dual-chamber layout and toolless panels

  • TypeATX Mid Tower
  • ColorWhite
  • Motherboard CompatibilityExtended ATX
  • Fan OptionsTop : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/1
  • Radiator OptionsTop : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad
  • Max GPU Length460mm

Model M5

Color White

  • Supports massive 420 mm radiator for extreme cooling
  • Dual-chamber layout fits 460 mm GPU and E-ATX board
  • Toolless tempered-glass panels simplify builds and upgrades
  • Ten 120 mm fan mounts deliver high airflow potential
  • 2 mm steel chassis provides rigid, quiet structure

White dual-chamber mid tower for E-ATX builds

The Geometric Future M5 is a white tempered-glass mid tower built around a dual-chamber layout that separates the power supply from the main hardware zone. It accepts Extended ATX motherboards and graphics cards up to 460 mm long, making it suitable for high-end gaming or workstation assemblies. The chassis uses 1.2 mm steel throughout for a rigid feel. A built-in display platform adds a distinctive spot for collectibles or small screens.

Upgrade from cramped single-chamber cases

Builders moving up from tighter enclosures gain room for a 420 mm radiator on top and a 360 mm unit at the bottom, plus a 120/140 mm rear radiator. The layout supports up to ten 120 mm fans across top, bottom, rear, right-front and motherboard-back positions. CPU coolers up to 180 mm tall fit without interference. The jump is worth it when a single-chamber design cannot swallow the radiator stack or long GPU required by the new parts list.

Dual-chamber airflow limits top

Filling both the top 420 mm and bottom 360 mm radiator mounts at once can starve the lower chamber of fresh air because the power supply sits between them. The right-front single 120/140/160 mm fan slot feeds the GPU zone directly but cannot match the volume of a triple-fan front wall. PSU length is capped at 160 mm, so longer units will not install. The motherboard-back pair of 120 mm fans exhausts heat from the rear chamber only.

Öne çıkanlar

  • Supports massive 420 mm radiator for extreme cooling
  • Dual-chamber layout fits 460 mm GPU and E-ATX board
  • Toolless tempered-glass panels simplify builds and upgrades
  • Ten 120 mm fan mounts deliver high airflow potential
  • 2 mm steel chassis provides rigid, quiet structure

Teknik özellikler

BrandGeometric Future
SeriesM5
TypeATX Mid Tower
ColorWhite
Motherboard CompatibilityExtended ATX
Fan OptionsTop : 120/140mm x 3
Rear : 120 /140mm x1
Right Front : 120/140/160mm x1
Motherboard back : 120mm x2
Bottom : 120/140mm x 3
Radiator OptionsTop : 360/420mm Rad
Rear : 120 /140mm Rad
Bottom : 360mm Rad
Max GPU Length460mm
Max CPU Cooler Height180mm
Max PSU Length160mm

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How much clearance does the M5 give for a graphics card?

The case accepts GPUs up to 460 mm long, so most triple-fan cards will fit without hitting the front panel.

What is the trickiest part of building in the dual-chamber layout?

The PSU mounts in a separate lower chamber; route the cables through the grommets before securing the supply or they become hard to reach.

How often should the magnetic dust filters be cleaned?

Remove and rinse the top, bottom and side filters every few months — more often in dusty rooms — to keep airflow at the rated 10 fan positions.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.