Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Geometric Future
White mid-tower case fits E-ATX boards, 460 mm graphics cards and 420 mm radiators with dual-chamber layout and toolless panels
The Geometric Future M5 is a white tempered-glass mid tower built around a dual-chamber layout that separates the power supply from the main hardware zone. It accepts Extended ATX motherboards and graphics cards up to 460 mm long, making it suitable for high-end gaming or workstation assemblies. The chassis uses 1.2 mm steel throughout for a rigid feel. A built-in display platform adds a distinctive spot for collectibles or small screens.
Builders moving up from tighter enclosures gain room for a 420 mm radiator on top and a 360 mm unit at the bottom, plus a 120/140 mm rear radiator. The layout supports up to ten 120 mm fans across top, bottom, rear, right-front and motherboard-back positions. CPU coolers up to 180 mm tall fit without interference. The jump is worth it when a single-chamber design cannot swallow the radiator stack or long GPU required by the new parts list.
Filling both the top 420 mm and bottom 360 mm radiator mounts at once can starve the lower chamber of fresh air because the power supply sits between them. The right-front single 120/140/160 mm fan slot feeds the GPU zone directly but cannot match the volume of a triple-fan front wall. PSU length is capped at 160 mm, so longer units will not install. The motherboard-back pair of 120 mm fans exhausts heat from the rear chamber only.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | White |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
The case accepts GPUs up to 460 mm long, so most triple-fan cards will fit without hitting the front panel.
The PSU mounts in a separate lower chamber; route the cables through the grommets before securing the supply or they become hard to reach.
Remove and rinse the top, bottom and side filters every few months — more often in dusty rooms — to keep airflow at the rated 10 fan positions.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?