Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Geometric Future
Dual-chamber mid-tower fits E-ATX boards, 460 mm GPUs and 420 mm radiators with toolless tempered-glass panels
The Geometric Future M5 is a mid-tower case built around a dual-chamber design that separates the motherboard tray from the power supply and drive cages. It accepts Extended ATX boards and graphics cards up to 460 mm long, while the CPU cooler clearance reaches 180 mm. The chassis uses steel between .8 mm and 1.2 mm thick throughout, finished in a black and yellow colour scheme.
Tempered glass side panels attach without screws, and a front-panel USB Type-C port is included for modern peripherals. The internal layout provides a dedicated display platform for small items or accessories. Fan mounts are distributed across every major surface: the top takes three 120 mm or 140 mm fans, the rear one, the right-front position one 120 mm, 140 mm or 160 mm fan, the motherboard back two 120 mm fans, and the bottom three 120 mm or 140 mm fans, totalling up to ten 120 mm equivalents.
Liquid-cooling capacity is defined by the radiator mounts: the top supports 360 mm or 420 mm units, the rear fits 120 mm or 140 mm, and the bottom accepts 360 mm. The power supply bay is limited to units no longer than 160 mm, which excludes many higher-wattage models. Builders needing more than ten fan positions, longer power supplies, or radiators larger than 420 mm will find the M5 unsuitable.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Yellow |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Wipe the glass with a microfibre cloth when dust appears; the toolless latches have no serviceable parts and do not require lubrication.
A 420 mm top radiator handles the highest heat load the case can mount, so GPU length (460 mm) and cooler height (180 mm) become the practical limits before cooling capacity does.
Ten 120 mm fans at full speed move large volume but generate noticeable noise; the 1.2 mm steel panels contain heat, so expect warm exterior surfaces during continuous loads.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?