Geometric Future M5 Vent White ATX Mid Tower PC case
- ATX Mid Tower
- White
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Geometric Future
Dual-chamber mid-tower fits E-ATX boards, 460 mm GPUs and 420 mm radiators with toolless tempered-glass panels
The Geometric Future M5 is a mid-tower case built around a dual-chamber design that separates the motherboard tray from the power supply and drive cages. It accepts Extended ATX boards and graphics cards up to 460 mm long, while the CPU cooler clearance reaches 180 mm. The chassis uses steel between .8 mm and 1.2 mm thick throughout, finished in a black and yellow colour scheme.
Tempered glass side panels attach without screws, and a front-panel USB Type-C port is included for modern peripherals. The internal layout provides a dedicated display platform for small items or accessories. Fan mounts are distributed across every major surface: the top takes three 120 mm or 140 mm fans, the rear one, the right-front position one 120 mm, 140 mm or 160 mm fan, the motherboard back two 120 mm fans, and the bottom three 120 mm or 140 mm fans, totalling up to ten 120 mm equivalents.
Liquid-cooling capacity is defined by the radiator mounts: the top supports 360 mm or 420 mm units, the rear fits 120 mm or 140 mm, and the bottom accepts 360 mm. The power supply bay is limited to units no longer than 160 mm, which excludes many higher-wattage models. Builders needing more than ten fan positions, longer power supplies, or radiators larger than 420 mm will find the M5 unsuitable.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Yellow |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm x1 Right Front : 120/140/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Wipe the glass with a microfibre cloth when dust appears; the toolless latches have no serviceable parts and do not require lubrication.
A 420 mm top radiator handles the highest heat load the case can mount, so GPU length (460 mm) and cooler height (180 mm) become the practical limits before cooling capacity does.
Ten 120 mm fans at full speed move large volume but generate noticeable noise; the 1.2 mm steel panels contain heat, so expect warm exterior surfaces during continuous loads.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?