Geometric Future M5 Vent Black/Yellow PC Case
- ATX Mid Tower
- Black/Yellow
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Geometric Future
Mid-tower chassis with dual-chamber layout fits E-ATX boards, 460 mm GPUs and 420 mm radiators
The Geometric Future M5 is a mid-tower chassis that accepts Extended ATX motherboards and graphics cards up to 460 mm long. Its dual-chamber layout separates the power supply from the main component area, giving builders a cleaner internal workspace. The structure uses 1.2 mm steel throughout for rigidity.
Two hinged tempered-glass panels open without tools for quick access to the interior. Five 140 mm fans come fitted from the factory at the rear, right-front, and bottom positions, delivering immediate airflow. A front-mounted USB Type-C port is included for modern peripherals.
The top chamber supports radiators up to 420 mm, while the bottom mounts a 360 mm unit and the rear takes 120 mm or 140 mm. CPU coolers are capped at 180 mm height and the power supply bay fits units up to 160 mm long. Ten 120 mm fan slots exist in total, but only the five 140 mm units are supplied.
| Brand | Geometric Future |
|---|---|
| Series | M5 |
| Type | ATX Mid Tower |
| Color | Black / Green |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm(pre-installed) x1 Right Front : 120/140(pre-installed)/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm(pre-installed) x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad |
| 140mm Fans | 5 |
| Max GPU Length | 460mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The five pre-installed fans use standard 120 mm and 140 mm frames, so they can be cleaned with compressed air or swapped for replacements of the same size when bearings wear out.
The 180 mm CPU cooler height clearance and the 460 mm GPU length limit define the largest components that fit, so radiator thickness and tubing routing become the practical ceiling before airflow does.
The 0.8 mm to 1.2 mm steel construction dampens mid-range fan noise, while the tempered glass side panels vent heat directly; actual dB and temperature figures depend on the specific fan curves and hardware installed.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?