Geometric Future M5 White Mid Tower PC Case
- ATX Mid Tower
- White
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Geometric Future
White mid-tower case with mesh front panel, tempered glass, five pre-installed 140mm ARGB PWM fans, E-ATX support, 420mm radiator clearance and 430mm GPU length
Color White / Includes 5 fans
The Geometric Future M5 Vent White is a mid-tower chassis built from 1.2mm steel with a mesh front panel and tempered glass side panel. It supports Extended ATX motherboards and provides a dual-chamber layout that separates the power supply and drives from the main component area. Five 140mm ARGB PWM fans are pre-installed across the top, rear, front, bottom and motherboard back positions. The white finish suits bright or monochrome builds.
Verify that your motherboard fits the Extended ATX mounting pattern before ordering. Measure the chosen CPU cooler against the 180mm maximum height allowance. Confirm that any top or bottom radiator does not exceed 420mm or 360mm respectively. Ensure the power supply length stays within the 160mm limit and that the graphics card length does not surpass 430mm. The front panel uses a USB Type-C connector so check for a matching header on the motherboard.
The five pre-installed 140mm ARGB PWM fans deliver immediate high-airflow cooling without extra purchases. Fan mounting points support up to 13 x 120mm fans in total for expanded configurations. A built-in display platform lets you show small items or custom panels inside the tempered glass window. The dual-chamber design routes cables behind the motherboard tray for a cleaner interior appearance.
| Brand | Geometric Future |
|---|---|
| Series | M5 Vent |
| Type | ATX Mid Tower |
| Color | White |
| Motherboard Compatibility | Extended ATX |
| Fan Options | Top : 120/140mm x 3 Rear : 120 /140mm(pre-installed) x1 Right Front : 120/140(pre-installed)/160mm x1 Motherboard back : 120mm x2 Bottom : 120/140mm(pre-installed) x 3 |
| Radiator Options | Top : 360/420mm Rad Rear : 120 /140mm Rad Bottom : 360mm Rad Front : 360mm Rad |
| 140mm Fans | 5 |
| Max GPU Length | 430mm |
| Max CPU Cooler Height | 180mm |
| Max PSU Length | 160mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The M5 Vent ships with five pre-installed 140 mm ARGB PWM fans, tempered-glass side panels and the steel chassis; you still need to supply the motherboard, power supply, graphics card, CPU cooler, storage drives and any extra fans beyond the 13 total slots.
Both fit the top bracket, but the 420 mm radiator uses the full width and gives more surface area for high-wattage CPUs, while the 360 mm leaves a little extra clearance for tall motherboard heatsinks or cable routing.
It means virtually any current triple-slot graphics card will fit with room to spare, so you can install a flagship model without worrying about it hitting the front radiator or the PSU shroud.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?