GUDGA
GUDGA GS 128GB 2.5" SATA internal SSD
A 2.5 inch SATA internal SSD with 128GB capacity, 3D TLC NAND, up to 550MB/s read and 500MB/s write speeds, 75TB TBW endurance, and 1,000,000 hours MTBF for PC or laptop storage upgrades
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity128GB
- Memory Components3D TLC
- InterfaceSATA III
Style SATAIII
- SATAIII
- 2.5"
- Fast boot and load times with 550MB/s read speed
- Responsive file saves backed by 500MB/s write speed
- Near-instant data access at 0.1ms seek time
- Durable 3D TLC NAND rated for 75TB written
- Reliable operation proven by 1,000,000-hour MTBF
GUDGA GS 128GB 2.5" SATA SSD
This GUDGA GS series drive is a 2.5 inch internal solid state drive with a 128GB capacity. It uses a SATA III interface and 3D TLC NAND flash memory. The drive is designed for consumer use in PCs, laptops and desktops.
Suits SATA upgrades and light workloads
This drive suits users upgrading older laptops or desktops that only support SATA storage. It fits 7mm drive bays in notebooks, mini PCs and all-in-one systems. Users needing higher capacities or faster transfer speeds should look at other options.
128GB capacity with 75TB endurance
The single specification that decides fit is the 128GB capacity combined with a 75TB TBW rating. Sequential reads reach 550MB/s and writes reach 500MB/s. The drive operates from 0°C to 70°C with a 1,000,000 hour MTBF.
Öne çıkanlar
- Fast boot and load times with 550MB/s read speed
- Responsive file saves backed by 500MB/s write speed
- Near-instant data access at 0.1ms seek time
- Durable 3D TLC NAND rated for 75TB written
- Reliable operation proven by 1,000,000-hour MTBF
Teknik özellikler
| Brand | GUDGA |
|---|---|
| Series | GS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 128GB |
| Memory Components | 3D TLC |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | 550MB/s |
| Max Sequential Write | 500MB/s |
| Seek Time | 0.1 ms |
| Terabytes Written (TBW) | 75TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +70°C |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
Bu modelin diğer sürümleri
Aynı seriden 5 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
Do I need a 2.5-inch drive bay and a SATA data cable plus 5 V power to install this 128 GB GS SSD?
Yes — the drive is a 7 mm 2.5" SATA III unit that plugs into a standard SATA data port and a 5 V SATA power connector.
Will this GS 128 GB SATA III drive work in a laptop that only supports SATA II 3 Gbps?
It will operate at the SATA II link speed, so sequential reads and writes will be limited to the 3 Gbps ceiling of the older controller.
How can I confirm the GS 128 GB SSD is delivering its rated 550 MB/s read and 500 MB/s write after installation?
Run a SATA‑capable benchmark such as CrystalDiskMark on a fresh NTFS partition and compare the sequential results to the 550 / 500 MB/s specifications.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
