GUDGA
GUDGA GVY 512GB M.2 2280 PCIe 3.0 x4 NVMe internal SSD with heatsink
- Internal Solid Stat…
- Consumer
$57,99
0.00074303BTC
Stokta
GUDGA
GUDGA GVY 256GB M.2 2280 PCIe 3.0x4 NVME internal SSD with Heatsink
256 GB M.2 2280 NVME SSD with graphene heatsink delivers up to 3300 MB/s read and 2700 MB/s write over PCIe 3.0 x4
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4
- ProtocolNVMe 1.3
- Sequential reads up to 3300 MB/s accelerate boot and load times
- Sequential writes up to 2700 MB/s speed up file transfers and saves
- 3D TLC NAND flash provides reliable storage for games and applications
- PCIe 3.0 x4 NVMe 1.3 interface delivers low-latency performance
- Graphene heat-dissipation patch keeps temperatures stable under sustained workloads
GUDGA GVY 256GB NVMe SSD
The GUDGA GVY is a 256GB internal solid-state drive built on the M.2 2280 form factor. It connects through a PCIe 3.0 x4 interface using the NVMe 1.3 protocol and uses 3D TLC NAND flash memory. A graphene heat dissipation patch is included to manage operating temperatures.
Suits PCIe 3.0 NVMe slots needing heatsink clearance
This drive fits desktops and laptops with an M.2 2280 slot wired for PCIe 3.0 x4 and NVMe 1.3. The attached heatsink adds height, so systems with tight clearance above the slot should verify space before purchase. Devices limited to PCIe 2.0 or without NVMe support cannot use this drive.
Sequential read up to 3300 MB/s
The manufacturer rates maximum sequential read speed at 3300 MB/s and maximum sequential write speed at 2700 MB/s. These figures represent the peak throughput the controller can deliver over the PCIe 3.0 x4 link. Real-world transfer rates will vary with workload, queue depth and system configuration.
Öne çıkanlar
- Sequential reads up to 3300 MB/s accelerate boot and load times
- Sequential writes up to 2700 MB/s speed up file transfers and saves
- 3D TLC NAND flash provides reliable storage for games and applications
- PCIe 3.0 x4 NVMe 1.3 interface delivers low-latency performance
- Graphene heat-dissipation patch keeps temperatures stable under sustained workloads
Teknik özellikler
| Brand | GUDGA |
|---|---|
| Series | GVY |
| Model | GVY-XXX-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| HeatSink | with HeatSink |
| Manufacturer Recertified | Yes |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
GUDGA
GUDGA GVY 1TB M.2 2280 PCIe 3.0x4 NVME internal SSD with Heatsink
- Internal Solid Stat…
- Consumer
$130,99
0.00167839BTC
StoktaBu ürünle ilgili sorular
Does the GUDGA GVY 256GB drive ship with a mounting screw or only the graphene heatsink attached?
The drive arrives with the graphene material heat dissipation patch already fitted; a motherboard mounting screw is not included and must be sourced separately.
Why choose the 256GB GVY model instead of a larger capacity in the same series?
The 256GB GVY delivers up to 3300MB/s read and 2700MB/s write over PCIe 3.0 x4 NVMe 1.3, giving fast start-up and loading for a lower outlay when total storage needs are modest.
Will the advertised 3300MB/s read speed be reached on a PCIe 3.0 x4 laptop slot?
Yes — the GVY is rated for up to 3300MB/s sequential read and 2700MB/s write on a PCIe 3.0 x4 NVMe 1.3 connection, so a compatible laptop slot can hit those figures.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
