Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Green circuit board with black graphene heatsink, M.2 2280 form factor

GUDGA

GUDGA GVY 256GB M.2 2280 PCIe 3.0x4 NVME internal SSD with Heatsink

SKU CH-7X88-HW4MC

256 GB M.2 2280 NVME SSD with graphene heatsink delivers up to 3300 MB/s read and 2700 MB/s write over PCIe 3.0 x4

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Memory Components3D TLC
  • InterfacePCI-Express 3.0 x4
  • ProtocolNVMe 1.3

Options 256GB

  • Sequential reads up to 3300 MB/s accelerate boot and load times
  • Sequential writes up to 2700 MB/s speed up file transfers and saves
  • 3D TLC NAND flash provides reliable storage for games and applications
  • PCIe 3.0 x4 NVMe 1.3 interface delivers low-latency performance
  • Graphene heat-dissipation patch keeps temperatures stable under sustained workloads

GUDGA GVY 256GB NVMe SSD

The GUDGA GVY is a 256GB internal solid-state drive built on the M.2 2280 form factor. It connects through a PCIe 3.0 x4 interface using the NVMe 1.3 protocol and uses 3D TLC NAND flash memory. A graphene heat dissipation patch is included to manage operating temperatures.

Suits PCIe 3.0 NVMe slots needing heatsink clearance

This drive fits desktops and laptops with an M.2 2280 slot wired for PCIe 3.0 x4 and NVMe 1.3. The attached heatsink adds height, so systems with tight clearance above the slot should verify space before purchase. Devices limited to PCIe 2.0 or without NVMe support cannot use this drive.

Sequential read up to 3300 MB/s

The manufacturer rates maximum sequential read speed at 3300 MB/s and maximum sequential write speed at 2700 MB/s. These figures represent the peak throughput the controller can deliver over the PCIe 3.0 x4 link. Real-world transfer rates will vary with workload, queue depth and system configuration.

Акценти

  • Sequential reads up to 3300 MB/s accelerate boot and load times
  • Sequential writes up to 2700 MB/s speed up file transfers and saves
  • 3D TLC NAND flash provides reliable storage for games and applications
  • PCIe 3.0 x4 NVMe 1.3 interface delivers low-latency performance
  • Graphene heat-dissipation patch keeps temperatures stable under sustained workloads

Спецификации

BrandGUDGA
SeriesGVY
ModelGVY-XXX-2280
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Memory Components3D TLC
InterfacePCI-Express 3.0 x4
ProtocolNVMe 1.3
HeatSinkwith HeatSink
Manufacturer RecertifiedYes

Други версии на този модел

2 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

Does the GUDGA GVY 256GB drive ship with a mounting screw or only the graphene heatsink attached?

The drive arrives with the graphene material heat dissipation patch already fitted; a motherboard mounting screw is not included and must be sourced separately.

Why choose the 256GB GVY model instead of a larger capacity in the same series?

The 256GB GVY delivers up to 3300MB/s read and 2700MB/s write over PCIe 3.0 x4 NVMe 1.3, giving fast start-up and loading for a lower outlay when total storage needs are modest.

Will the advertised 3300MB/s read speed be reached on a PCIe 3.0 x4 laptop slot?

Yes — the GVY is rated for up to 3300MB/s sequential read and 2700MB/s write on a PCIe 3.0 x4 NVMe 1.3 connection, so a compatible laptop slot can hit those figures.

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.