Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Rectangular M.2 2280 SSD with black graphene heatsink patch

GUDGA

GUDGA GXF-Q-4TB-PRO-2280 internal SSD

SKU CH-1ATE-9YZEV

4 TB M.2 2280 PCIe 4.0 x4 NVMe SSD with graphene heat-dissipation patch delivering 7200 MB/s reads and 6400 MB/s writes

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity4TB
  • Memory Components3D NAND
  • InterfacePCI-Express 4.0 x4

Options 4TB

  • Fast boot and load times from 7200MB/s sequential read
  • Sustained large-file writes at 6400MB/s sequential write
  • 3D NAND stores 4TB in a single M.2 2280 module
  • Graphene heat-dissipation patch keeps temperatures steady under load
  • PCIe 4.0 x4 NVMe interface delivers full bandwidth to compatible systems

Capacity and form factor

The GUDGA GXF-Q-4TB-PRO-2280 is an internal solid-state drive with a 4TB capacity in the M.2 2280 form factor. It connects via a PCIe 4.0 x4 interface using the NVME protocol and uses 3D NAND flash memory. A graphene heat dissipation patch is included to help manage thermals during heavy workloads.

Who this suits and who it does not

This drive suits desktop PCs, laptops and compatible consoles that accept a standard M.2 2280 NVME module and can supply adequate airflow for the attached heatsink. Builders needing a shorter module or a different interface should look elsewhere.

Deciding specification

The PCIe 4.0 x4 NVME interface with sequential reads up to 7200MB/s and writes up to 6400MB/s is the specification that determines whether this drive matches the host system's slot and performance requirements.

Öne çıkanlar

  • Fast boot and load times from 7200MB/s sequential read
  • Sustained large-file writes at 6400MB/s sequential write
  • 3D NAND stores 4TB in a single M.2 2280 module
  • Graphene heat-dissipation patch keeps temperatures steady under load
  • PCIe 4.0 x4 NVMe interface delivers full bandwidth to compatible systems

Teknik özellikler

BrandGUDGA
SeriesGXF-PRO
ModelGXF-Q-4TB-PRO-2280
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity4TB
Memory Components3D NAND
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential Read7200MB/s
Max Sequential Write6400MB/s
HeatSinkwith HeatSink

Bu modelin diğer sürümleri

Aynı seriden 3 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the included graphene heat-dissipation patch fit inside a standard M.2 2280 slot on a PS5 or motherboard?

The drive is built to the M.2 2280 form factor with the graphene patch pre-applied, so it occupies the same 22 mm by 80 mm footprint as any standard 2280 module.

What is the correct way to seat this PCIe 4.0 x4 NVMe drive, and which step do builders often skip?

Insert the notched edge into the M.2 key, press the drive flat against the board, and secure it with the retention screw; the step most often missed is tightening that screw, which keeps the graphene patch in contact with the controller.

How long is the warranty period, and what component wear does it cover?

The manufacturer provides a 5-year warranty covering defects in the 3D NAND flash and controller during normal consumer use.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.