HPE
HPE 872479-B21 1.2 TB 10000 RPM 2.5 inch SAS internal hard drive
1.2 TB 10000 RPM 2.5 inch SAS hot-swap hard drive with 12 Gb/s transfer rate and 512n format
- 2 TB capacity supports data-intensive workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/sec SAS interface enables high-throughput transfers
- 5 inch SFF form factor fits dense server bays
- 512n format ensures broad compatibility
HPE 872479-B21 1.2 TB SAS drive
This 1.2 TB hot-swap hard drive operates at 10000 RPM with a 12 Gb/sec SAS interface. It uses a 2.5 inch SFF form factor and 512n format type for enterprise server environments. The drive is designed for HPE Gen9 and Gen10 systems requiring high-speed storage.
Suits 12 Gb/sec SAS bays only
This drive suits servers with 2.5 inch SAS bays supporting 12 Gb/sec transfer rates. It is not for systems limited to lower SAS speeds or different physical form factors. Buyers needing larger capacity or a different interface should look elsewhere.
12 Gb/sec SAS interface decides fit
The single specification that decides compatibility is the 12 Gb/sec SAS external transfer rate. Your server backplane and controller must support this exact speed and the SAS protocol. Verify the 872479-B21 part number against your hardware maintenance guide before purchase.
Öne çıkanlar
- 2 TB capacity supports data-intensive workloads
- 10000 RPM spindle speed delivers fast data access
- 12 Gb/sec SAS interface enables high-throughput transfers
- 5 inch SFF form factor fits dense server bays
- 512n format ensures broad compatibility
Teknik özellikler
Bu ürün için henüz yayınlanmış teknik özellik yok.
Bu ürünle ilgili sorular
What transfer rate does the 12 Gb/sec SAS interface actually deliver on this drive?
The 12 Gb/sec SAS interface caps the external transfer rate at 12 Gb/sec for the 872479-B21.
What physical space and tray does the 2.5 inch SFF form factor require?
It fits a standard 2.5 inch SFF hot-swap bay and uses the carrier supplied with HPE G9 or G10 servers.
How is the 512n format drive installed in a hot-swap tray, and what step is often missed?
Slide the drive into the tray until the SAS connector seats firmly, then lock the lever; the step often missed is not pushing far enough to engage the connector.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
