Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small silver 2.5 inch SAS hard drive with hot-swap tray

HPE

HPE 872479-B21 1.2 TB 10000 RPM 2.5 inch SAS internal hard drive

SKU CH-CJWR-6C8VG

1.2 TB 10000 RPM 2.5 inch SAS hot-swap hard drive with 12 Gb/s transfer rate and 512n format

  • 2 TB capacity supports data-intensive workloads
  • 10000 RPM spindle speed delivers fast data access
  • 12 Gb/sec SAS interface enables high-throughput transfers
  • 5 inch SFF form factor fits dense server bays
  • 512n format ensures broad compatibility

HPE 872479-B21 1.2 TB SAS drive

This 1.2 TB hot-swap hard drive operates at 10000 RPM with a 12 Gb/sec SAS interface. It uses a 2.5 inch SFF form factor and 512n format type for enterprise server environments. The drive is designed for HPE Gen9 and Gen10 systems requiring high-speed storage.

Suits 12 Gb/sec SAS bays only

This drive suits servers with 2.5 inch SAS bays supporting 12 Gb/sec transfer rates. It is not for systems limited to lower SAS speeds or different physical form factors. Buyers needing larger capacity or a different interface should look elsewhere.

12 Gb/sec SAS interface decides fit

The single specification that decides compatibility is the 12 Gb/sec SAS external transfer rate. Your server backplane and controller must support this exact speed and the SAS protocol. Verify the 872479-B21 part number against your hardware maintenance guide before purchase.

Prednosti

  • 2 TB capacity supports data-intensive workloads
  • 10000 RPM spindle speed delivers fast data access
  • 12 Gb/sec SAS interface enables high-throughput transfers
  • 5 inch SFF form factor fits dense server bays
  • 512n format ensures broad compatibility

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What transfer rate does the 12 Gb/sec SAS interface actually deliver on this drive?

The 12 Gb/sec SAS interface caps the external transfer rate at 12 Gb/sec for the 872479-B21.

What physical space and tray does the 2.5 inch SFF form factor require?

It fits a standard 2.5 inch SFF hot-swap bay and uses the carrier supplied with HPE G9 or G10 servers.

How is the 512n format drive installed in a hot-swap tray, and what step is often missed?

Slide the drive into the tray until the SAS connector seats firmly, then lock the lever; the step often missed is not pushing far enough to engage the connector.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.