Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black tower server chassis with three silver hot-swap drive handles on the front panel

iStarUSA Inc.

iStarUSA Inc. S-35-3M1SL server chassis 3x 3.5" hot-swap mini-ITX tower

SKU CH-9VNG-N04YJ MPN S-35-3M1SL

Compact mini-ITX tower with three 3.5" hot-swap bays, one 120 mm fan and front USB 2.0 ports

  • Chassis TypeTower
  • ColorBlack
  • Case MaterialAluminum / Steel
  • Motherboard CompatibilityMini ITX
  • Hot-Swap Drive Bays3 x 3.5"
  • Internal 2.5" Drive Bays1

Model S-35-3M1SL

  • 3 hot-swap 3.5" bays for high-capacity storage
  • Mini-ITX motherboard support in a compact tower
  • 120 mm fan provides active cooling
  • Front USB 2.0 ports for easy peripheral access
  • Aluminium and steel construction with silver drive handles

Compact tower for mini-ITX storage builds

This black aluminium and steel tower accepts a mini-ITX motherboard and provides three hot-swap 3.5-inch drive bays plus one internal 2.5-inch bay. It is aimed at builders who need dense, front-accessible storage in a small footprint without a full-sized server rack.

Single 120 mm fan and front ventilation

One 120 mm fan is included to move air across the drive cage and motherboard area. The 4 mm aluminium front panel and mesh styling assist passive airflow, while the compact dimensions of 8.90 by 8.68 by 12.76 inches limit internal volume for high-wattage components.

Silver hot-swap handles and Flex PSU support

Each 3.5-inch bay uses a silver handle for tool-free drive changes and supports 6.0 Gb/s SATA and SAS drives. The chassis is compatible with Flex form-factor power supplies, and the front panel offers two USB 2.0 ports for local media access.

Öne çıkanlar

  • 3 hot-swap 3.5" bays for high-capacity storage
  • Mini-ITX motherboard support in a compact tower
  • 120 mm fan provides active cooling
  • Front USB 2.0 ports for easy peripheral access
  • Aluminium and steel construction with silver drive handles

Teknik özellikler

BrandiStarUSA
ModelS-35-3M1SL
Chassis TypeTower
ColorBlack
Case MaterialAluminum / Steel
Motherboard CompatibilityMini ITX
Hot-Swap Drive Bays3 x 3.5"
Internal 2.5" Drive Bays1
Expansion Slots1
Front Ports2 x USB 2.0
120mm Fans1
FeaturesSilver HDD Handle
Sleek Front Panel with Power On Button
3x 3.5" Hotswap Bays
4mm Aluminum Front Panel
Support 6.0Gb/s SATA/SAS HDDs
First PVC Laminate Technical in NAS Chassis
Compatible with Flex Power Supply
Heavy Duty SECC Construction
Support Standard I/O Slot
Support mini-ITX Motherboard
Dimensions8.90" x 8.68" x 12.76"
Kargo ağırlığı8.17 kg
Koli boyutu325 × 226 × 221 mm

Bu modelin diğer sürümleri

Aynı seriden 3 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How do I install the 3.5" drives into the hot-swap bays and what step is often missed?

Slide each drive into a front bay until the silver handle clicks, then secure the handle latch; the step often missed is fully engaging the latch so the SATA/SAS connector seats at 6.0Gb/s.

What maintenance or replacement will the cooling system need later?

The single 120mm fan is the only active cooling component; plan to clean its blades periodically and replace the fan if noise or airflow drops.

What limit appears first when the chassis runs under sustained load?

With only one 120mm fan and three 3.5" drives, thermal headroom is the first constraint; sustained write loads can raise internal temperatures before drive or interface limits are reached.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.