Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black tower server chassis with three silver hot-swap drive handles on the front panel

iStarUSA Inc.

iStarUSA Inc. S-35-3M1SL server chassis 3x 3.5" hot-swap mini-ITX tower

SKU CH-9VNG-N04YJ MPN S-35-3M1SL

Compact mini-ITX tower with three 3.5" hot-swap bays, one 120 mm fan and front USB 2.0 ports

  • Chassis TypeTower
  • ColorBlack
  • Case MaterialAluminum / Steel
  • Motherboard CompatibilityMini ITX
  • Hot-Swap Drive Bays3 x 3.5"
  • Internal 2.5" Drive Bays1

Model S-35-3M1SL

  • 3 hot-swap 3.5" bays for high-capacity storage
  • Mini-ITX motherboard support in a compact tower
  • 120 mm fan provides active cooling
  • Front USB 2.0 ports for easy peripheral access
  • Aluminium and steel construction with silver drive handles

Compact tower for mini-ITX storage builds

This black aluminium and steel tower accepts a mini-ITX motherboard and provides three hot-swap 3.5-inch drive bays plus one internal 2.5-inch bay. It is aimed at builders who need dense, front-accessible storage in a small footprint without a full-sized server rack.

Single 120 mm fan and front ventilation

One 120 mm fan is included to move air across the drive cage and motherboard area. The 4 mm aluminium front panel and mesh styling assist passive airflow, while the compact dimensions of 8.90 by 8.68 by 12.76 inches limit internal volume for high-wattage components.

Silver hot-swap handles and Flex PSU support

Each 3.5-inch bay uses a silver handle for tool-free drive changes and supports 6.0 Gb/s SATA and SAS drives. The chassis is compatible with Flex form-factor power supplies, and the front panel offers two USB 2.0 ports for local media access.

Přednosti

  • 3 hot-swap 3.5" bays for high-capacity storage
  • Mini-ITX motherboard support in a compact tower
  • 120 mm fan provides active cooling
  • Front USB 2.0 ports for easy peripheral access
  • Aluminium and steel construction with silver drive handles

Specifikace

BrandiStarUSA
ModelS-35-3M1SL
Chassis TypeTower
ColorBlack
Case MaterialAluminum / Steel
Motherboard CompatibilityMini ITX
Hot-Swap Drive Bays3 x 3.5"
Internal 2.5" Drive Bays1
Expansion Slots1
Front Ports2 x USB 2.0
120mm Fans1
FeaturesSilver HDD Handle
Sleek Front Panel with Power On Button
3x 3.5" Hotswap Bays
4mm Aluminum Front Panel
Support 6.0Gb/s SATA/SAS HDDs
First PVC Laminate Technical in NAS Chassis
Compatible with Flex Power Supply
Heavy Duty SECC Construction
Support Standard I/O Slot
Support mini-ITX Motherboard
Dimensions8.90" x 8.68" x 12.76"
Přepravní hmotnost8.17 kg
Rozměry balení325 × 226 × 221 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 3.5" drives into the hot-swap bays and what step is often missed?

Slide each drive into a front bay until the silver handle clicks, then secure the handle latch; the step often missed is fully engaging the latch so the SATA/SAS connector seats at 6.0Gb/s.

What maintenance or replacement will the cooling system need later?

The single 120mm fan is the only active cooling component; plan to clean its blades periodically and replace the fan if noise or airflow drops.

What limit appears first when the chassis runs under sustained load?

With only one 120mm fan and three 3.5" drives, thermal headroom is the first constraint; sustained write loads can raise internal temperatures before drive or interface limits are reached.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.