Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Three matte-black 120 mm square fans with clear centre rings and ARGB lighting, shown as a triple pack

Jungle Leopard

Jungle Leopard Prism6 PRO ARGB 120mm Case Fan Black 3-Pack

SKU CH-FWHA-6K5CP

Three-pack of 120 mm ARGB case fans with infinite-mirror lighting, hydraulic bearings and 1600 RPM PWM control

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color Black Forward-3Pack

  • Infinite mirror ARGB creates layered lighting from any angle
  • PWM control adjusts 765–1600 RPM for airflow or silence
  • Hydraulic bearing delivers 61.5 CFM at only 30 dBA
  • 120 mm black frame fits standard case and radiator mounts
  • Three fans included with screws for quick installation

Three-fan ARGB pack for illuminated builds

This Jungle Leopard Prism6 PRO three-pack delivers 120 mm ARGB case fans with an infinite-mirror lighting effect on three sides. Each fan uses a hydraulic bearing and PWM control to vary speed between 765 and 1600 RPM. The black frame and transparent blades suit builders who want coordinated lighting across intake and exhaust positions.

Check motherboard headers and case clearance

Verify that your motherboard provides a 5 V 3-pin ARGB header or a compatible controller for the lighting, plus a 4-pin PWM fan header for speed control. Each fan measures 120×120×25 mm, so confirm your chassis has mounting points for 120 mm fans at the desired locations. Four self-tapping screws per fan are included for installation.

Sustained airflow at rated pressure

At full load the fans maintain 1600 RPM ± 10 % to move 61.5 CFM against 2 mmH₂O static pressure while producing 30 dBA. The hydraulic bearing and low thermal-resistance design keep performance stable during extended operation, avoiding the speed drop-off that can occur with sleeve bearings under continuous heat.

Öne çıkanlar

  • Infinite mirror ARGB creates layered lighting from any angle
  • PWM control adjusts 765–1600 RPM for airflow or silence
  • Hydraulic bearing delivers 61.5 CFM at only 30 dBA
  • 120 mm black frame fits standard case and radiator mounts
  • Three fans included with screws for quick installation

Teknik özellikler

BrandJungle Leopard
SeriesPrism6 PRO
ModelJL Prism6 PRO BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1600RPM
Air Flow61.5CFM
Air Pressure2mmH2O
Noise Level= 30dBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Does the 3-pack include mounting screws or do I need to buy them separately?

The pack comes with four self-tapping screws per fan so you can install all three fans straight out of the box.

Should I choose the black or white version for a 120 mm ARGB build?

Both colours share the same 1600 RPM PWM spec, 61.5 CFM airflow and 30 dBA noise rating; pick the shade that matches your case interior.

What does the 2 mmH₂O static pressure mean when the fan is mounted on a radiator?

At full 1600 RPM the fan delivers 2 mmH₂O pressure, enough to push air through a standard 120 mm radiator while staying at 30 dBA.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.