Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
White 120mm reverse-blade ARGB case fan with three-sided infinite mirror centre ring and side mirrors, hydraulic bearing, 25mm thick

Jungle Leopard

Jungle Leopard Prism6 MAX 120mm Reverse Blade ARGB Case Fan White 1-Pack

SKU CH-FAK7-VW5RF

A 120 mm reverse-blade ARGB case fan with hydraulic bearing, 800–1850 RPM, 58.36 CFM airflow and 29 dBA noise

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White Reverse-1Pack

  • Three-sided infinite mirror ARGB lighting creates depth with 0.5 mm layered mirrors
  • Reverse-blade design lets you pair fans for custom airflow paths inside the chassis
  • Nine balanced blades deliver 58.36 CFM at 1850 RPM while staying at 29 dBA
  • Hydraulic bearing reduces wear and noise for longer service life
  • Dual silicone shock pads absorb vibration from case resonance

Reverse-blade 120 mm ARGB fan

The Jungle Leopard Prism6 MAX is a single 120 mm case fan with a reverse-blade layout and hydraulic bearing. It targets builders who want controllable airflow direction and addressable RGB lighting in a white finish. The unit spins between 800 and 1850 RPM while producing 29 dBA at typical speed.

Three-sided infinite-mirror lighting

The fan uses layered 0.5 mm mirrors on both sides and a central circular mirror to create a depth effect visible from multiple angles. A 5 V 3-pin ARGB header is required for motherboard synchronisation; without it a separate controller box must be added. The magnetic base and silicone pads simplify mounting and reduce vibration.

PWM and 5 V ARGB interface limits

Speed control relies on a standard 4-pin PWM connection, while lighting depends on a 5 V 3-pin header that not all mainboards provide. Maximum airflow reaches 58.36 CFM with 2.07 mmH₂O static pressure, figures suited to typical case ventilation but not extreme radiator stacks. Buyers needing higher static pressure or 12 V RGB ecosystems should look elsewhere.

Öne çıkanlar

  • Three-sided infinite mirror ARGB lighting creates depth with 0.5 mm layered mirrors
  • Reverse-blade design lets you pair fans for custom airflow paths inside the chassis
  • Nine balanced blades deliver 58.36 CFM at 1850 RPM while staying at 29 dBA
  • Hydraulic bearing reduces wear and noise for longer service life
  • Dual silicone shock pads absorb vibration from case resonance

Teknik özellikler

BrandJungle Leopard
SeriesPrism6 MAX
ModelJL Prism6 MAX BK
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM1850RPM
Air Flow58.36CFM
Air Pressure2.07mmH20
Noise Level=29DBA
Power Connector3 / 4 Pin
ColorBlack / White
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

How often will the hydraulic bearing need maintenance or replacement?

The hydraulic bearing is sealed for life and requires no routine maintenance; replacement is only needed if the fan fails after extended use.

What limit appears first when the fan runs at 1850 RPM continuously?

Sustained operation at 1850 RPM is capped by the 29 dBA noise rating, which becomes the practical ceiling before thermal or bearing limits.

How much heat and power does the ARGB lighting add during all-day use?

The 5 V 3-pin ARGB circuit draws only a few watts, adding negligible heat while the fan itself stays at 29 dBA under full load.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.