Thermalright
Thermalright MC-3 Digital Memory Cooler, Triple 40mm PWM Fans, ARGB Display, 4500RPM, DDR-DDR5, Black
Cools DDR to DDR5 memory with three 40mm PWM fans up to 4500RPM and an ARGB display controlled via TRCC software
- TypeFan & Heatsinks
- CompatibilityDDR/DDR2/DDR3/DDR4/DDR5
- Bearing TypeDual Ball Bearing
- RPM4500RPM±10%(MAX)
- Noise Level=16.9dB(A)
- Power Connector4PIN
- Triple 40 mm PWM fans push 4.48 CFM each to cut RAM temps under load
- Dual ball bearings and 16.9 dB(A) keep high airflow quiet during long sessions
- Clips onto DDR through DDR5 modules tool-free for a fast, secure fit
- ARGB display links to TRCC software via 9-pin USB header for live monitoring
- Compact 153×46×57.7 mm block adds active cooling without crowding the build
Active RAM Cooler with ARGB Display
The Thermalright MC-3 DIGITAL BLACK is an active memory cooler built for desktop PCs. It mounts on DDR through DDR5 modules using a tool-free clip. Triple 40mm PWM fans push up to 4500RPM with dual ball bearings. An ARGB display connects via a motherboard 9-pin USB header for TRCC software monitoring.
For Overclockers and High-Load Builds
This cooler suits gamers and overclockers who need lower memory temperatures during sustained workloads. It also fits builders wanting ARGB lighting and real-time display data. Systems with limited clearance around the DIMM slots or without a spare 9-pin USB header should consider simpler passive heatsinks instead.
Cooling Capacity and Limits
Three TL-B4010 fans deliver 4.48CFM each at 1.37mmH2O pressure while running as quiet as 16.9dB(A). The assembly measures 153×46×57.7mm including fans. It handles heat from high-frequency DDR5 and heavy overclocks, but extreme voltage runs or multi-kit populated banks may exceed the airflow headroom.
Öne çıkanlar
- Triple 40 mm PWM fans push 4.48 CFM each to cut RAM temps under load
- Dual ball bearings and 16.9 dB(A) keep high airflow quiet during long sessions
- Clips onto DDR through DDR5 modules tool-free for a fast, secure fit
- ARGB display links to TRCC software via 9-pin USB header for live monitoring
- Compact 153×46×57.7 mm block adds active cooling without crowding the build
Teknik özellikler
| Brand | Thermalright |
|---|---|
| Model | MC-3 DIGITAL BLACK |
| Type | Fan & Heatsinks |
| Compatibility | DDR/DDR2/DDR3/DDR4/DDR5 |
| Bearing Type | Dual Ball Bearing |
| RPM | 4500RPM±10%(MAX) |
| Noise Level | =16.9dB(A) |
| Power Connector | 4PIN |
| Fan Color | Black |
| Fan Dimensions | L40mm×W40mm×H10mm |
| Heatsink Dimensions | 153×46×57.7mm (includes three fans) |
Bu ürünle ilgili sorular
Does my motherboard need a 9-pin USB header for the MC-3 Digital display and TRCC software to work?
Yes, the digital display power and data communication run through a motherboard 9-pin USB header, so that connection must be present and complete before installing the TRCC software.
Will the 153×46×57.7 mm clip-on cooler clear tall DDR5 heatsinks on adjacent slots?
The cooler clamps from both sides of the memory modules and its 153 mm length spans standard desktop DIMM spacing; verify your specific module height and slot layout against the 46 mm width and 57.7 mm depth before ordering.
How can I confirm the three TL-B4010 fans are spinning at the correct speed after installation?
Connect the 4-pin PWM connectors to the motherboard, then monitor RPM in BIOS or TRCC software — each fan should report up to 4500 RPM ±10 % under load.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
$0,82
0.00001042BTC
Stokta