Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Round development board with 1.28 inch circular LCD screen, Type-C connector and GPIO headers

LORDWORLD

LORDWORLD ESP32-S3 Development Board 1.28in Round LCD 2MB PSRAM 16MB Flash

SKU CH-71JE-B6QNV

A round 1.28 inch IPS display development board with an ESP32-S3 dual-core processor, 2MB PSRAM, 16MB flash, 2.4 GHz Wi-Fi, Bluetooth 5, a six-axis IMU and a lithium battery header

  • Round 1.28in IPS display shows colour graphics at 240×240
  • Dual-core Xtensa LX7 processor runs up to 240 MHz for responsive code
  • 2MB PSRAM plus 16MB Flash store larger projects and buffers
  • Onboard QMI8658 6-axis IMU detects motion and gesture input
  • 4 GHz Wi-Fi and Bluetooth 5 connect sensors and phones wirelessly

ESP32-S3 board with round LCD

The LORDWORLD ESP32-S3 Development Board integrates a 1.28inch round IPS display at 240×240 resolution with 65K color. An Xtensa 32-bit LX7 dual-core processor runs up to 240MHz with 512KB SRAM, 384KB ROM, 2MB PSRAM and 16MB Flash. It targets makers building wearable or compact IoT prototypes that need an on-board screen and motion sensing.

Type-C power and GPIO headers

A Type-C connector handles power and USB serial communication for programming. The board includes a 3.7V lithium battery recharge/discharge header for portable operation. GPIO headers expose configurable pins while an onboard QMI8658 6-axis IMU provides accelerometer and gyroscope data for gesture detection.

Check antenna needs and battery wiring

Verify that 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 coverage suits the installation environment. Confirm the 3.7V battery header pinout matches your cell before connecting. Ensure your toolchain supports the Xtensa LX7 architecture and that the round 240×240 display format fits the intended enclosure.

Öne çıkanlar

  • Round 1.28in IPS display shows colour graphics at 240×240
  • Dual-core Xtensa LX7 processor runs up to 240 MHz for responsive code
  • 2MB PSRAM plus 16MB Flash store larger projects and buffers
  • Onboard QMI8658 6-axis IMU detects motion and gesture input
  • 4 GHz Wi-Fi and Bluetooth 5 connect sensors and phones wirelessly

Teknik özellikler

BrandLORDWORLD

Bu ürünle ilgili sorular

What Wi-Fi standard does the board use and what band does it operate on?

The board uses 802.11 b/g/n Wi-Fi on the 2.4 GHz band with an onboard antenna.

What pin headers are provided for power and expansion?

A 3.7 V lithium battery recharge/discharge header and GPIO headers are onboard for power and I/O.

How is the board programmed and which port is used?

Connect the USB Type-C port to a computer; the integrated USB serial controller appears as a COM port for flashing firmware.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.