Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Small rectangular silver circuit board with 24-pin ATX connector and DC barrel jack

myVolts

myVolts 1106 DC-ATX 12V 300W Pico PSU 24-pin

SKU CH-G7D8-DVYWQ

Converts 11.2–12.6 V DC input into 300 W ATX power with 24-pin output, short-circuit shutdown and 85 % efficiency

  • TypeAT
  • Delivers 300 W continuous power from a compact pico form factor
  • Operates on 11.2–12.6 V DC input for 12 V battery or regulated sources
  • Includes 24-pin ATX and DC cables for direct motherboard connection
  • Built-in protections shut down output on short-circuit or peak current events
  • Rated 85 % efficiency between 15 °C and 35 °C operating temperature

Compact 300 W DC-ATX power for Mini-ITX

The myVolts 1106 accepts 11.2 to 12.6 V DC through a 2.5 mm by 5.5 mm barrel connector and delivers up to 300 W through a standard 24-pin ATX cable. It targets builders assembling small-form-factor systems that run from a 12 V DC source such as a laptop-style brick or a regulated battery pack. The unit includes both the 20+4-pin motherboard cable and the DC input cable in the package.

300 W continuous with 85 % efficiency headroom

At 85 % typical efficiency the converter supplies the rated 300 W while drawing a maximum of 20 A at the low end of the input range. Output shutdown engages when any rail reaches its peak current limit, and short-circuit protection cuts power instantly on a fault. Defensive monitoring covers the +3.3 V, +5 V, +5 V standby and +12 V rails, so the supply protects downstream components before damage occurs.

Passive cooling rated to 35 °C ambient

The pico-format board relies on convection and case airflow rather than an onboard fan, operating silently in environments from 15 °C to 35 °C at 45 % to 75 % humidity. Internal switching runs at 250 to 350 kHz, keeping component stress low. Storage tolerance spans -40 °C to +70 °C at 10 % to 90 % humidity, so the unit survives unheated transit or long-term shelf storage without degradation.

Öne çıkanlar

  • Delivers 300 W continuous power from a compact pico form factor
  • Operates on 11.2–12.6 V DC input for 12 V battery or regulated sources
  • Includes 24-pin ATX and DC cables for direct motherboard connection
  • Built-in protections shut down output on short-circuit or peak current events
  • Rated 85 % efficiency between 15 °C and 35 °C operating temperature

Teknik özellikler

TypeAT

Bu ürünle ilgili sorular

Will the 1106 pico PSU work with my existing 12 V DC adapter that delivers 20 A?

Yes, the unit accepts 11.4 V to 12.8 V DC input and draws up to 20.0 A at 11.4 V, so a 12 V 20 A source is within specification.

How can I verify the 1106 is delivering stable power after installation?

Measure the +3.3 V, +5 V, +12 V and +5 V SB rails with a multimeter; all should read within ATX tolerance and the PSU will shut down automatically if a short circuit or peak current is detected.

Does the 1106 come with the 24-pin ATX cable and the DC input cable, or must I buy them separately?

Both the 20+4-pin ATX cable and the DC input cable are included in the box; no extra cables are required for a basic installation.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.