Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Small rectangular silver circuit board with 24-pin ATX connector and DC barrel jack

myVolts

myVolts 1106 DC-ATX 12V 300W Pico PSU 24-pin

SKU CH-G7D8-DVYWQ

Converts 11.2–12.6 V DC input into 300 W ATX power with 24-pin output, short-circuit shutdown and 85 % efficiency

  • TypeAT
  • Delivers 300 W continuous power from a compact pico form factor
  • Operates on 11.2–12.6 V DC input for 12 V battery or regulated sources
  • Includes 24-pin ATX and DC cables for direct motherboard connection
  • Built-in protections shut down output on short-circuit or peak current events
  • Rated 85 % efficiency between 15 °C and 35 °C operating temperature

Compact 300 W DC-ATX power for Mini-ITX

The myVolts 1106 accepts 11.2 to 12.6 V DC through a 2.5 mm by 5.5 mm barrel connector and delivers up to 300 W through a standard 24-pin ATX cable. It targets builders assembling small-form-factor systems that run from a 12 V DC source such as a laptop-style brick or a regulated battery pack. The unit includes both the 20+4-pin motherboard cable and the DC input cable in the package.

300 W continuous with 85 % efficiency headroom

At 85 % typical efficiency the converter supplies the rated 300 W while drawing a maximum of 20 A at the low end of the input range. Output shutdown engages when any rail reaches its peak current limit, and short-circuit protection cuts power instantly on a fault. Defensive monitoring covers the +3.3 V, +5 V, +5 V standby and +12 V rails, so the supply protects downstream components before damage occurs.

Passive cooling rated to 35 °C ambient

The pico-format board relies on convection and case airflow rather than an onboard fan, operating silently in environments from 15 °C to 35 °C at 45 % to 75 % humidity. Internal switching runs at 250 to 350 kHz, keeping component stress low. Storage tolerance spans -40 °C to +70 °C at 10 % to 90 % humidity, so the unit survives unheated transit or long-term shelf storage without degradation.

Points forts

  • Delivers 300 W continuous power from a compact pico form factor
  • Operates on 11.2–12.6 V DC input for 12 V battery or regulated sources
  • Includes 24-pin ATX and DC cables for direct motherboard connection
  • Built-in protections shut down output on short-circuit or peak current events
  • Rated 85 % efficiency between 15 °C and 35 °C operating temperature

Caractéristiques

TypeAT

Questions sur cet article

Will the 1106 pico PSU work with my existing 12 V DC adapter that delivers 20 A?

Yes, the unit accepts 11.4 V to 12.8 V DC input and draws up to 20.0 A at 11.4 V, so a 12 V 20 A source is within specification.

How can I verify the 1106 is delivering stable power after installation?

Measure the +3.3 V, +5 V, +12 V and +5 V SB rails with a multimeter; all should read within ATX tolerance and the PSU will shut down automatically if a short circuit or peak current is detected.

Does the 1106 come with the 24-pin ATX cable and the DC input cable, or must I buy them separately?

Both the 20+4-pin ATX cable and the DC input cable are included in the box; no extra cables are required for a basic installation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.