Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Two red PCI-E 1x to 16x riser cards with 10 capacitors temperature display and RGB LED lights connected by 24 inch USB 3.0 cables

myVolts

myVolts PCI-E 1x to 16x Riser Card VER013 Pro 2-Pack

SKU CH-HQKA-PSCYH

Two PCI-E 1x to 16x riser cards with 10 solid capacitors, temperature probe alarm at 75 degrees, RGB LED indicators and 60cm USB 3.0 cables

  • TypeAT
  • Stable GPU power delivery with 10 solid capacitors
  • Real-time temperature monitoring up to 75 degrees with alarm
  • RGB LED status indicator shows adapter operation at a glance
  • Multi-layer shielded 60 cm USB 3.0 cable preserves signal integrity
  • Plug-and-play compatibility with 1x, 4x, 8x and 16x PCI-E slots

PCI-E 1x to 16x Riser Card

This two-pack provides a PCI-E 1x to 16x riser card set designed to connect graphics cards to any compatible PCI-E slot. Each unit includes a 60cm USB 3.0 cable and features ten solid capacitors for stable power delivery. The VER013 Pro version adds a temperature probe and RGB LED lighting for monitoring and status indication. It suits miners and builders who need flexible GPU placement.

Mining and multi-GPU builders

These risers suit users building mining rigs or multi-GPU systems where cards cannot sit directly on the motherboard. The probe alarms at 75 degrees and the LED shows power status, aiding safety. Builders who need a x16 electrical link or a shorter cable than 24 inches should look elsewhere. Systems without a free 6-pin or 15-pin power connector cannot use these adapters.

Temperature probe with 75-degree alarm

The onboard display defaults to temperature and flashes an alarm when the GPU reaches 75 degrees. A button cycles through Fahrenheit, 12V voltage reading, and an off mode for the display and LEDs. This single monitoring feature lets you judge thermal safety at a glance without extra software.

Öne çıkanlar

  • Stable GPU power delivery with 10 solid capacitors
  • Real-time temperature monitoring up to 75 degrees with alarm
  • RGB LED status indicator shows adapter operation at a glance
  • Multi-layer shielded 60 cm USB 3.0 cable preserves signal integrity
  • Plug-and-play compatibility with 1x, 4x, 8x and 16x PCI-E slots

Teknik özellikler

TypeAT

Bu ürünle ilgili sorular

Does my motherboard need a free PCIe 1x, 4x, 8x or 16x slot for this riser card?

Yes, the riser plugs into any standard PCIe slot — 1x, 4x, 8x or 16x — and the graphics card then connects to the riser's 16x connector.

Will a graphics card that only draws power through a 6-pin connector work with the included 6-pin power cable?

The kit supplies a 6-pin power cable for the riser board itself; your GPU must still receive its own required power connectors from the PSU.

How can I confirm the riser is operating correctly once everything is connected?

The on-board display shows temperature by default — it flashes and alarms at 75 °C — and the RGB LED indicates power status; press the button to cycle through Fahrenheit, 12 V voltage readout or to toggle the display and LEDs off.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.