Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Two red PCI-E 1x to 16x riser cards with 10 capacitors temperature display and RGB LED lights connected by 24 inch USB 3.0 cables

myVolts

myVolts PCI-E 1x to 16x Riser Card VER013 Pro 2-Pack

SKU CH-HQKA-PSCYH

Two PCI-E 1x to 16x riser cards with 10 solid capacitors, temperature probe alarm at 75 degrees, RGB LED indicators and 60cm USB 3.0 cables

  • TypeAT
  • Stable GPU power delivery with 10 solid capacitors
  • Real-time temperature monitoring up to 75 degrees with alarm
  • RGB LED status indicator shows adapter operation at a glance
  • Multi-layer shielded 60 cm USB 3.0 cable preserves signal integrity
  • Plug-and-play compatibility with 1x, 4x, 8x and 16x PCI-E slots

PCI-E 1x to 16x Riser Card

This two-pack provides a PCI-E 1x to 16x riser card set designed to connect graphics cards to any compatible PCI-E slot. Each unit includes a 60cm USB 3.0 cable and features ten solid capacitors for stable power delivery. The VER013 Pro version adds a temperature probe and RGB LED lighting for monitoring and status indication. It suits miners and builders who need flexible GPU placement.

Mining and multi-GPU builders

These risers suit users building mining rigs or multi-GPU systems where cards cannot sit directly on the motherboard. The probe alarms at 75 degrees and the LED shows power status, aiding safety. Builders who need a x16 electrical link or a shorter cable than 24 inches should look elsewhere. Systems without a free 6-pin or 15-pin power connector cannot use these adapters.

Temperature probe with 75-degree alarm

The onboard display defaults to temperature and flashes an alarm when the GPU reaches 75 degrees. A button cycles through Fahrenheit, 12V voltage reading, and an off mode for the display and LEDs. This single monitoring feature lets you judge thermal safety at a glance without extra software.

Pontos fortes

  • Stable GPU power delivery with 10 solid capacitors
  • Real-time temperature monitoring up to 75 degrees with alarm
  • RGB LED status indicator shows adapter operation at a glance
  • Multi-layer shielded 60 cm USB 3.0 cable preserves signal integrity
  • Plug-and-play compatibility with 1x, 4x, 8x and 16x PCI-E slots

Especificações

TypeAT

Perguntas sobre este artigo

Does my motherboard need a free PCIe 1x, 4x, 8x or 16x slot for this riser card?

Yes, the riser plugs into any standard PCIe slot — 1x, 4x, 8x or 16x — and the graphics card then connects to the riser's 16x connector.

Will a graphics card that only draws power through a 6-pin connector work with the included 6-pin power cable?

The kit supplies a 6-pin power cable for the riser board itself; your GPU must still receive its own required power connectors from the PSU.

How can I confirm the riser is operating correctly once everything is connected?

The on-board display shows temperature by default — it flashes and alarms at 75 °C — and the RGB LED indicates power status; press the button to cycle through Fahrenheit, 12 V voltage readout or to toggle the display and LEDs off.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.