NEMIX RAM
NEMIX RAM 128GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM memory upgrade for Supermicro SYS-222HA-TN
A 128 GB DDR5 6400 MHz ECC registered DIMM with CL52 latency and 1.1 V operation for the Supermicro SYS-222HA-TN
- Capacity128GB
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Compatible SystemSupermicro
- 128GB DDR5 capacity scales server workloads
- 6400MHz PC5-51200 speed feeds data-intensive applications
- ECC RDIMM registered design protects data integrity
- 1V operation reduces platform power draw
- Validated for Supermicro SYS-222HA-TN systems
128GB DDR5 ECC RDIMM for Supermicro SYS-222HA-TN
This 128GB DDR5 registered DIMM delivers error-correcting memory for the Supermicro SYS-222HA-TN server. It runs at 6400MHz with CL52 latency at 1.1V. The module uses a 2Rx4 organisation and major OEM DRAM chips. It is built for enterprise workloads that require data integrity and high capacity.
Server administrators needing registered ECC memory
This module suits administrators upgrading the Supermicro SYS-222HA-TN with validated ECC RDIMM memory. It is not for desktop PCs or laptops that require unbuffered non-ECC DIMMs. Builders needing lower capacities or different speeds should look at other system-specific kits. Workstations without registered memory support cannot use this module.
Tool-free DIMM slot installation
Installation follows the standard 288-pin DDR5 RDIMM procedure: power down, open the chassis, align the notch, and press until the ejectors latch. The registered buffer adds negligible physical effort. The usual mistake is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting. Always populate slots per the motherboard manual.
Öne çıkanlar
- 128GB DDR5 capacity scales server workloads
- 6400MHz PC5-51200 speed feeds data-intensive applications
- ECC RDIMM registered design protects data integrity
- 1V operation reduces platform power draw
- Validated for Supermicro SYS-222HA-TN systems
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL52 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB (1 x 128GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM |
Bu ürünle ilgili sorular
What motherboard slot is required for the 288-PIN DDR5 RDIMM to fit?
The module uses a 288-PIN DDR5 RDIMM form factor, so the motherboard must provide a matching 288-PIN DDR5 DIMM slot.
Can the 1.1V DDR5 6400MHz module run in a system that only supports 1.2V DDR5?
The module operates at 1.1V; if the platform only supplies 1.2V the memory may not initialise or could run out of spec.
How can I confirm the CL52 2Rx4 ECC RDIMM is recognised at 6400MHz after installation?
Check the BIOS memory information or OS tools such as dmidecode to verify the module reports 6400MHz, CL52, 2Rx4 organisation and ECC active.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.



