Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz CL52 1.1V 2Rx4 ECC RDIMM memory upgrade for Supermicro SYS-222HA-TN

SKU CH-S59N-AJS5Z

A 128 GB DDR5 6400 MHz ECC registered DIMM with CL52 latency and 1.1 V operation for the Supermicro SYS-222HA-TN

  • Capacity128GB
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Compatible SystemSupermicro
  • 128GB DDR5 capacity scales server workloads
  • 6400MHz PC5-51200 speed feeds data-intensive applications
  • ECC RDIMM registered design protects data integrity
  • 1V operation reduces platform power draw
  • Validated for Supermicro SYS-222HA-TN systems

128GB DDR5 ECC RDIMM for Supermicro SYS-222HA-TN

This 128GB DDR5 registered DIMM delivers error-correcting memory for the Supermicro SYS-222HA-TN server. It runs at 6400MHz with CL52 latency at 1.1V. The module uses a 2Rx4 organisation and major OEM DRAM chips. It is built for enterprise workloads that require data integrity and high capacity.

Server administrators needing registered ECC memory

This module suits administrators upgrading the Supermicro SYS-222HA-TN with validated ECC RDIMM memory. It is not for desktop PCs or laptops that require unbuffered non-ECC DIMMs. Builders needing lower capacities or different speeds should look at other system-specific kits. Workstations without registered memory support cannot use this module.

Tool-free DIMM slot installation

Installation follows the standard 288-pin DDR5 RDIMM procedure: power down, open the chassis, align the notch, and press until the ejectors latch. The registered buffer adds negligible physical effort. The usual mistake is mixing registered and unbuffered DIMMs in the same channel, which prevents the system from posting. Always populate slots per the motherboard manual.

Přednosti

  • 128GB DDR5 capacity scales server workloads
  • 6400MHz PC5-51200 speed feeds data-intensive applications
  • ECC RDIMM registered design protects data integrity
  • 1V operation reduces platform power draw
  • Validated for Supermicro SYS-222HA-TN systems

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL52
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB (1 x 128GB) DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM

Otázky k tomuto produktu

What motherboard slot is required for the 288-PIN DDR5 RDIMM to fit?

The module uses a 288-PIN DDR5 RDIMM form factor, so the motherboard must provide a matching 288-PIN DDR5 DIMM slot.

Can the 1.1V DDR5 6400MHz module run in a system that only supports 1.2V DDR5?

The module operates at 1.1V; if the platform only supplies 1.2V the memory may not initialise or could run out of spec.

How can I confirm the CL52 2Rx4 ECC RDIMM is recognised at 6400MHz after installation?

Check the BIOS memory information or OS tools such as dmidecode to verify the module reports 6400MHz, CL52, 2Rx4 organisation and ECC active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.