BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00280092BTC
Stokta
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 1.2V UDIMM SuperMicro MBD-C9Z390-CG memory upgrade
16 GB DDR4-2666 CL19 1.2 V 288-pin UDIMM kit validated for SuperMicro MBD-C9Z390-CG motherboards
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 CL19 timing balances speed and stability
- 2 V operation keeps power draw low
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for SuperMicro MBD-C9Z390-CG motherboard
NEMIX RAM 16GB DDR4 2666 Kit
This 16GB kit contains two 8GB DDR4 UDIMM modules rated at 2666MHz with CL19 latency. It is built for the SuperMicro MBD-C9Z390-CG motherboard and other compatible SuperMicro desktop workstations. The modules are non-ECC and unbuffered for standard desktop use.
DDR4 2666 CL19 1.20V specification
The decisive specification is the DDR4 2666 (PC4-21300) speed combined with 1.20V voltage and CL19 timing. Your system must accept DDR4 UDIMM memory at this exact speed and voltage for the kit to function correctly. Verify the motherboard supports 288-pin unbuffered non-ECC modules before purchase.
Standard voltage low-profile operation
Operating at the standard DDR4 voltage of 1.20V, these modules draw minimal power and run cool without a heat spreader. The bare PCB design keeps the profile low for tight slots while silent passive cooling handles normal workloads. No active cooling or extra airflow is required for typical desktop operation.
Öne çıkanlar
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2666 CL19 timing balances speed and stability
- 2 V operation keeps power draw low
- 288-pin UDIMM form factor fits standard desktop slots
- Validated for SuperMicro MBD-C9Z390-CG motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT |
Bu ürünle ilgili sorular
What does the DDR4 2666 speed mean once the modules are installed in a SuperMicro MBD-C9Z390-CG system?
The kit runs at 2666 MT/s with CL19 timing, delivering the standard DDR4 2666 data rate the board’s memory controller expects.
What does the PC4-21300 label on these UDIMMs tell me about the interface limit?
PC4-21300 is the JEDEC designation for DDR4 2666, confirming the modules operate at the 2666 MT/s ceiling of that standard.
Will the 288-pin UDIMM form factor fit the DIMM slots on the MBD-C9Z390-CG motherboard?
Yes, the kit uses the standard 288-pin DDR4 UDIMM layout that matches the desktop DIMM sockets on that board.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
