Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR4 UDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 1.2V UDIMM SuperMicro MBD-C9Z390-CG memory upgrade

SKU CH-35S1-S4KHA

16 GB DDR4-2666 CL19 1.2 V 288-pin UDIMM kit validated for SuperMicro MBD-C9Z390-CG motherboards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 CL19 timing balances speed and stability
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for SuperMicro MBD-C9Z390-CG motherboard

NEMIX RAM 16GB DDR4 2666 Kit

This 16GB kit contains two 8GB DDR4 UDIMM modules rated at 2666MHz with CL19 latency. It is built for the SuperMicro MBD-C9Z390-CG motherboard and other compatible SuperMicro desktop workstations. The modules are non-ECC and unbuffered for standard desktop use.

DDR4 2666 CL19 1.20V specification

The decisive specification is the DDR4 2666 (PC4-21300) speed combined with 1.20V voltage and CL19 timing. Your system must accept DDR4 UDIMM memory at this exact speed and voltage for the kit to function correctly. Verify the motherboard supports 288-pin unbuffered non-ECC modules before purchase.

Standard voltage low-profile operation

Operating at the standard DDR4 voltage of 1.20V, these modules draw minimal power and run cool without a heat spreader. The bare PCB design keeps the profile low for tight slots while silent passive cooling handles normal workloads. No active cooling or extra airflow is required for typical desktop operation.

Puncte forte

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2666 CL19 timing balances speed and stability
  • 2 V operation keeps power draw low
  • 288-pin UDIMM form factor fits standard desktop slots
  • Validated for SuperMicro MBD-C9Z390-CG motherboard

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM KIT

Întrebări despre acest articol

What does the DDR4 2666 speed mean once the modules are installed in a SuperMicro MBD-C9Z390-CG system?

The kit runs at 2666 MT/s with CL19 timing, delivering the standard DDR4 2666 data rate the board’s memory controller expects.

What does the PC4-21300 label on these UDIMMs tell me about the interface limit?

PC4-21300 is the JEDEC designation for DDR4 2666, confirming the modules operate at the 2666 MT/s ceiling of that standard.

Will the 288-pin UDIMM form factor fit the DIMM slots on the MBD-C9Z390-CG motherboard?

Yes, the kit uses the standard 288-pin DDR4 UDIMM layout that matches the desktop DIMM sockets on that board.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.