Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600 CL46 4Rx4 ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-80AS-W9820

256 GB kit of two 128 GB DDR5 5600 CL46 4Rx4 ECC RDIMM modules validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity across two 128 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches platform voltage requirements for reliable compatibility
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F memory controller exactly

Server memory kit for Supermicro X14SDW-40C-SP9F

This 256 GB kit contains two 128 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. Registered ECC architecture with 4Rx4 organisation matches the memory controller requirements of the Supermicro X14SDW-40C-SP9F motherboard.

Suited for populated server upgrades not partial

Administrators expanding every slot on the X14SDW-40C-SP9F will get full-capacity recognition and ECC error correction. Builders needing only a single module or a lower total capacity should look elsewhere because the kit is sold as a matched pair.

4Rx4 registered ECC at 1.10 V decides compatibility

The board expects 288-pin RDIMMs with exactly this rank structure, voltage and error-correction type. Modules with different ranks, voltage or unbuffered design will not initialise correctly on this platform.

Öne çıkanlar

  • 256 GB capacity across two 128 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches platform voltage requirements for reliable compatibility
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F memory controller exactly

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Will the 288-pin DDR5 RDIMM modules fit the Supermicro X14SDW-40C-SP9F motherboard?

Yes, the kit uses the 288-pin RDIMM form factor that this board requires, not UDIMM or SODIMM.

What population order should I follow when installing the 2 x 128 GB DDR5 5600 CL46 4Rx4 RDIMMs?

Consult the motherboard manual for the approved DIMM population order before installing both modules.

Do the DDR5 5600 RDIMMs need a heat spreader or active cooling for long-term operation?

The modules have no heat spreader; rely on the server's chassis airflow to keep them within operating temperature.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.