暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 128GB each

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600 CL46 4Rx4 ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-80AS-W9820

256 GB kit of two 128 GB DDR5 5600 CL46 4Rx4 ECC RDIMM modules validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB capacity across two 128 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches platform voltage requirements for reliable compatibility
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F memory controller exactly

Server memory kit for Supermicro X14SDW-40C-SP9F

This 256 GB kit contains two 128 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. Registered ECC architecture with 4Rx4 organisation matches the memory controller requirements of the Supermicro X14SDW-40C-SP9F motherboard.

Suited for populated server upgrades not partial

Administrators expanding every slot on the X14SDW-40C-SP9F will get full-capacity recognition and ECC error correction. Builders needing only a single module or a lower total capacity should look elsewhere because the kit is sold as a matched pair.

4Rx4 registered ECC at 1.10 V decides compatibility

The board expects 288-pin RDIMMs with exactly this rank structure, voltage and error-correction type. Modules with different ranks, voltage or unbuffered design will not initialise correctly on this platform.

特長

  • 256 GB capacity across two 128 GB modules maximises server memory density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for demanding workloads
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches platform voltage requirements for reliable compatibility
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-40C-SP9F memory controller exactly

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 288-pin DDR5 RDIMM modules fit the Supermicro X14SDW-40C-SP9F motherboard?

Yes, the kit uses the 288-pin RDIMM form factor that this board requires, not UDIMM or SODIMM.

What population order should I follow when installing the 2 x 128 GB DDR5 5600 CL46 4Rx4 RDIMMs?

Consult the motherboard manual for the approved DIMM population order before installing both modules.

Do the DDR5 5600 RDIMMs need a heat spreader or active cooling for long-term operation?

The modules have no heat spreader; rely on the server's chassis airflow to keep them within operating temperature.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。