暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5-6400 CL52 4Rx4 RDIMM ECC Supermicro X14SDW-36C-SP9F

SKU CH-EAHY-CDFAX

256GB DDR5-6400 registered ECC kit (2×128GB, CL52, 1.1V, 4Rx4) validated for the Supermicro X14SDW-36C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB capacity with two 128 GB modules for maximum server memory density
  • DDR5 6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 4Rx4 organisation and 1.1 V voltage match the Supermicro X14SDW-36C-SP9F memory controller exactly
  • 288-pin RDIMM form factor fits the motherboard's registered DIMM slots without adapters

Exact-match 256GB DDR5-6400 kit

This 256GB kit contains two 128GB DDR5-6400 Registered ECC RDIMMs built to the Supermicro X14SDW-36C-SP9F memory controller specification. The modules run at 1.10V with CL52 latency and a 4Rx4 rank structure so the board recognises the full capacity at rated speed.

Sustained enterprise stability

Registered architecture buffers every address and command line, letting all slots stay fully populated without signal degradation during continuous workloads. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots on production systems.

Replaces partial or slower populations

The kit upgrades a partially filled board or slower DDR5 modules to the maximum validated 256GB at DDR5-6400. The jump is worth it when the workload demands full registered capacity and ECC integrity at the board's highest supported data rate.

特長

  • 256 GB capacity with two 128 GB modules for maximum server memory density
  • DDR5 6400 speed rated at PC5-51200 for high-throughput workloads
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 4Rx4 organisation and 1.1 V voltage match the Supermicro X14SDW-36C-SP9F memory controller exactly
  • 288-pin RDIMM form factor fits the motherboard's registered DIMM slots without adapters

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power does the 1.1V DDR5-6400 kit draw when the server runs all day?

Each module operates at 1.1V, the standard voltage for DDR5-6400 RDIMMs; total system power depends on CPU load and the Supermicro X14SDW-36C-SP9F motherboard's memory-controller efficiency.

What motherboard and memory slots are required for this 288-pin RDIMM kit to function?

The kit is validated for the Supermicro X14SDW-36C-SP9F motherboard, which must provide DDR5 RDIMM slots and follow the board's population rules for 4Rx4 registered modules.

Will the 4Rx4 registered ECC modules work alongside other DDR5 RDIMMs I might keep in the remaining slots?

Mixing ranks is possible only if the Supermicro X14SDW-36C-SP9F manual approves the specific population order; the board's memory controller must support 4Rx4 modules in every populated channel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。