SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00503746BTC
Stokta
NEMIX RAM
NEMIX RAM 256GB (4×64GB) DDR5 5600 CL46 ECC RDIMM SuperMicro X13DGU memory upgrade
A 256 GB DDR5 registered ECC kit of four 64 GB modules running at 5600 MT/s with CL46 latency for SuperMicro X13DGU servers
- Capacity256GB (4 x 64GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 256 GB total capacity from four 64 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered RDIMM design for data integrity
- 1 V operating voltage for efficient power use
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
SuperMicro X13DGU DDR5 upgrade
This 256GB kit provides four 64GB DDR5 RDIMM modules validated for the SuperMicro MBD-X13DGU AI SuperServer motherboard. Registered ECC operation protects data integrity in server and workstation workloads. The kit arrives new and ready for installation.
256GB capacity at 5600 MT/s CL46
Four dual-rank 2Rx4 modules deliver 256GB total capacity running at DDR5 5600 (PC5-44800) with CAS latency 46 and 1.1V voltage. Registered buffering and ECC maintain stability under sustained load; headroom ends at the motherboard’s maximum supported speed and slot count.
Fits SuperMicro X13DGU RDIMM slots
The 288-pin RDIMM form factor installs directly into the X13DGU memory slots without adapters. No heat spreaders are fitted, so airflow clearance depends on the chassis design. Buyers needing non-ECC UDIMMs or higher frequencies must select a different kit.
Öne çıkanlar
- 256 GB total capacity from four 64 GB modules
- DDR5 5600 speed rated at PC5-44800 bandwidth
- ECC registered RDIMM design for data integrity
- 1 V operating voltage for efficient power use
- Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (4X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
Bu ürünle ilgili sorular
Will these 288-pin DDR5 5600 RDIMMs run at their rated speed alongside existing DDR5 4800 modules in the SuperMicro X13DGU?
The board will clock all installed DDR5 down to the slowest module; mixing 5600 and 4800 RDIMMs forces the kit to operate at 4800 MT/s.
How can I confirm the 256 GB kit is running as ECC registered memory at CL46 after installation?
Check the BIOS memory information screen — it should report 256 GB total, DDR5 5600, ECC enabled, registered, and CAS latency 46.
Does the MR44800-924K4 package include only the four 64 GB RDIMMs or are any cables or tools supplied?
The box contains only the four 64 GB DDR5 5600 CL46 ECC RDIMMs; no cables, heat spreaders or installation tools are included.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
