We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (4×64GB) DDR5 5600 CL46 ECC RDIMM SuperMicro X13DGU memory upgrade

SKU CH-P8XJ-X2SE6

A 256 GB DDR5 registered ECC kit of four 64 GB modules running at 5600 MT/s with CL46 latency for SuperMicro X13DGU servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered RDIMM design for data integrity
  • 1 V operating voltage for efficient power use
  • Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard

SuperMicro X13DGU DDR5 upgrade

This 256GB kit provides four 64GB DDR5 RDIMM modules validated for the SuperMicro MBD-X13DGU AI SuperServer motherboard. Registered ECC operation protects data integrity in server and workstation workloads. The kit arrives new and ready for installation.

256GB capacity at 5600 MT/s CL46

Four dual-rank 2Rx4 modules deliver 256GB total capacity running at DDR5 5600 (PC5-44800) with CAS latency 46 and 1.1V voltage. Registered buffering and ECC maintain stability under sustained load; headroom ends at the motherboard’s maximum supported speed and slot count.

Fits SuperMicro X13DGU RDIMM slots

The 288-pin RDIMM form factor installs directly into the X13DGU memory slots without adapters. No heat spreaders are fitted, so airflow clearance depends on the chassis design. Buyers needing non-ECC UDIMMs or higher frequencies must select a different kit.

Highlights

  • 256 GB total capacity from four 64 GB modules
  • DDR5 5600 speed rated at PC5-44800 bandwidth
  • ECC registered RDIMM design for data integrity
  • 1 V operating voltage for efficient power use
  • Validated for SuperMicro MBD-X13DGU AI SuperServer motherboard

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will these 288-pin DDR5 5600 RDIMMs run at their rated speed alongside existing DDR5 4800 modules in the SuperMicro X13DGU?

The board will clock all installed DDR5 down to the slowest module; mixing 5600 and 4800 RDIMMs forces the kit to operate at 4800 MT/s.

How can I confirm the 256 GB kit is running as ECC registered memory at CL46 after installation?

Check the BIOS memory information screen — it should report 256 GB total, DDR5 5600, ECC enabled, registered, and CAS latency 46.

Does the MR44800-924K4 package include only the four 64 GB RDIMMs or are any cables or tools supplied?

The box contains only the four 64 GB DDR5 5600 CL46 ECC RDIMMs; no cables, heat spreaders or installation tools are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.