BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00278882BTC
Stokta
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 1.2V 2Rx8 ASRock B450M-HDV R4.0 memory upgrade
32 GB dual-channel DDR4-3200 CL22 kit with two 16 GB unbuffered UDIMMs validated for ASRock B450M-HDV R4.0 motherboards
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity across two 16 GB modules for multitasking headroom
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- CL22 latency at 1.2 V for efficient operation
- 288-pin unbuffered non-ECC UDIMM fits standard desktop slots
- Validated for ASRock B450M-HDV R4.0 motherboard compatibility
ASRock B450M-HDV R4.0 32GB DDR4 Kit
This 32GB kit contains two 16GB DDR4 UDIMM modules rated at 3200MHz with CL22 latency. It is built for owners of the ASRock B450M-HDV R4.0 motherboard who want a matched pair that installs without configuration changes. The modules are non-ECC, unbuffered and run at the standard 1.2V.
DDR4 3200 practical limits
The JEDEC DDR4 3200 standard tops out at this data rate without manual tuning, so the kit will not exceed PC4-25600 bandwidth on its own. CL22 timing is the baseline for this speed grade, and the 2Rx8 organisation means each module presents two ranks to the memory controller. No heat spreader is fitted, so sustained heavy workloads rely on case airflow alone.
Upgrade from 16GB or slower DDR4
Replacing a single 16GB stick or a slower DDR4 pair with this kit doubles capacity and moves to the 3200MHz JEDEC ceiling. The jump is worthwhile when the board and CPU officially support 3200MHz and the workload benefits from more than 16GB, such as multitasking, virtual machines or large media projects. Systems limited to lower speeds or smaller maximum capacity will not gain the full benefit.
Öne çıkanlar
- 32 GB capacity across two 16 GB modules for multitasking headroom
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- CL22 latency at 1.2 V for efficient operation
- 288-pin unbuffered non-ECC UDIMM fits standard desktop slots
- Validated for ASRock B450M-HDV R4.0 motherboard compatibility
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Bu ürünle ilgili sorular
Should I pick the 2x16GB kit or a single 32GB module for the ASRock B450M-HDV R4.0?
The 2x16GB kit enables dual-channel bandwidth on the board, giving better throughput than a single module of the same total capacity.
What does the 3200MHz rating actually deliver once installed in the B450M-HDV R4.0?
The modules run at DDR4 3200 with CL22 timings at 1.20V; the board will operate them at the highest speed its memory controller and BIOS allow.
Does the 288-pin DDR4 UDIMM interface limit the speed on this motherboard?
The 288-pin DDR4 UDIMM form factor matches the board's slots; the practical ceiling is set by the CPU's memory controller and the BIOS, not the connector itself.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
