BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277632BTC
Stokta
NEMIX RAM
NEMIX RAM 32GB DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 260-Pin SODIMM for POSIFLEX XT-8317
32 GB DDR4 3200 SODIMM module validated for POSIFLEX XT-8317 terminals
- Capacity32GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity lets POS terminals handle heavier workloads
- DDR4 3200 speed matches system bus for stable operation
- CL22 latency at 1.2 V keeps power draw low
- 2Rx8 260-pin SODIMM fits the XT-8317 slot exactly
- Major OEM chips tested under load for reliability
POSIFLEX XT-8317 memory upgrade
This 32GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8317 JIVA fanless point-of-sale terminal. The single-module design fills one slot with 32GB of capacity, using 2Rx8 organisation and a 1.20V operating voltage. Non-ECC unbuffered operation matches the platform's standard memory controller requirements.
Sustained workload stability
Modules are stress tested under load before shipping, so the 3200MT/s data rate and CL22 latency remain consistent during long retail shifts. The 1.2V DDR4 voltage keeps thermal output low inside the fanless chassis, preventing throttling when the terminal processes transactions continuously for hours.
260-pin SODIMM form factor
The stick uses major OEM chips from Samsung, Micron or Hynix without a heat spreader, allowing it to fit the tight clearances of the XT-8317 motherboard. A 260-pin DDR4 key ensures correct alignment during installation, and the single 32GB module leaves any second slot free for future expansion if the board supports it.
Öne çıkanlar
- 32 GB capacity lets POS terminals handle heavier workloads
- DDR4 3200 speed matches system bus for stable operation
- CL22 latency at 1.2 V keeps power draw low
- 2Rx8 260-pin SODIMM fits the XT-8317 slot exactly
- Major OEM chips tested under load for reliability
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-328K1 |
| Capacity | 32GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Bu ürünle ilgili sorular
How much heat and power does the 1.2 V DDR4 3200 SODIMM draw when the POS terminal runs continuously?
The module operates at 1.2 V with no heat spreader, so it adds minimal thermal load and power draw to the fanless POSIFLEX XT-8317 during all-day use.
What must the POSIFLEX XT-8317 already have for this 260-pin 32 GB stick to work?
The terminal needs a free DDR4 SODIMM slot that accepts 2Rx8 CL22 modules at 3200 MT/s and supports non-ECC unbuffered memory.
Will this PC4-25600 CL22 module run stably alongside any existing DDR4 memory in the XT-8317?
Yes, it will down-clock to match slower installed DDR4 and operate at the lowest common CAS latency while keeping 1.2 V operation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
