Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 260-pin DDR4 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 260-Pin SODIMM for POSIFLEX XT-8317

SKU CH-EQ8J-K09SM

32 GB DDR4 3200 SODIMM module validated for POSIFLEX XT-8317 terminals

  • Capacity32GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity lets POS terminals handle heavier workloads
  • DDR4 3200 speed matches system bus for stable operation
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 260-pin SODIMM fits the XT-8317 slot exactly
  • Major OEM chips tested under load for reliability

POSIFLEX XT-8317 memory upgrade

This 32GB DDR4 SODIMM is built specifically for the POSIFLEX XT-8317 JIVA fanless point-of-sale terminal. The single-module design fills one slot with 32GB of capacity, using 2Rx8 organisation and a 1.20V operating voltage. Non-ECC unbuffered operation matches the platform's standard memory controller requirements.

Sustained workload stability

Modules are stress tested under load before shipping, so the 3200MT/s data rate and CL22 latency remain consistent during long retail shifts. The 1.2V DDR4 voltage keeps thermal output low inside the fanless chassis, preventing throttling when the terminal processes transactions continuously for hours.

260-pin SODIMM form factor

The stick uses major OEM chips from Samsung, Micron or Hynix without a heat spreader, allowing it to fit the tight clearances of the XT-8317 motherboard. A 260-pin DDR4 key ensures correct alignment during installation, and the single 32GB module leaves any second slot free for future expansion if the board supports it.

Points forts

  • 32 GB capacity lets POS terminals handle heavier workloads
  • DDR4 3200 speed matches system bus for stable operation
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 260-pin SODIMM fits the XT-8317 slot exactly
  • Major OEM chips tested under load for reliability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K1
Capacity32GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

How much heat and power does the 1.2 V DDR4 3200 SODIMM draw when the POS terminal runs continuously?

The module operates at 1.2 V with no heat spreader, so it adds minimal thermal load and power draw to the fanless POSIFLEX XT-8317 during all-day use.

What must the POSIFLEX XT-8317 already have for this 260-pin 32 GB stick to work?

The terminal needs a free DDR4 SODIMM slot that accepts 2Rx8 CL22 modules at 3200 MT/s and supports non-ECC unbuffered memory.

Will this PC4-25600 CL22 module run stably alongside any existing DDR4 memory in the XT-8317?

Yes, it will down-clock to match slower installed DDR4 and operate at the lowest common CAS latency while keeping 1.2 V operation.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.