BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277478BTC
Stokta
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HS-2410W JIVA memory upgrade
A 4 GB DDR3 SODIMM module rated at 1333 MHz for POSIFLEX HS-2410W JIVA systems
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HS-2410W JIVA POS systems
- 4GB DDR3 1333MHz CL9 for responsive operation
- Low 1.35V voltage reduces power consumption
- 204-pin SODIMM fits compatible POSIFLEX motherboards
- Built with major OEM chips for reliability
POSIFLEX JIVA POS Memory Upgrade
This 4GB DDR3 1333 SODIMM is built specifically for the POSIFLEX HS-2410W JIVA desktop point-of-sale system. It installs as a single 204-pin module to increase the memory available for POS applications.
Suits maintainers of this exact terminal
Technicians servicing the HS-2410W JIVA can use this non-ECC unbuffered stick to restore or expand system memory. It is not intended for laptops, standard desktops or any other POS hardware that requires a different pin count, voltage or form factor.
2Rx8 dual-rank organisation at CL9
The module uses a 2Rx8 chip arrangement with CAS latency 9, which determines how the HS-2410W memory controller accesses the 4GB capacity. Verify that the system BIOS recognises this rank configuration before purchase.
Öne çıkanlar
- Designed for POSIFLEX HS-2410W JIVA POS systems
- 4GB DDR3 1333MHz CL9 for responsive operation
- Low 1.35V voltage reduces power consumption
- 204-pin SODIMM fits compatible POSIFLEX motherboards
- Built with major OEM chips for reliability
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Bu ürünle ilgili sorular
Does the DDR3 1333 PC3-10600 interface limit practical throughput?
The module runs at DDR3 1333 with a PC3-10600 rating and CL9 latency; actual throughput depends on the POSIFLEX HS-2410W JIVA memory controller.
What physical slot and form factor does this 204-pin SODIMM require?
It fits a standard 204-pin DDR3 SODIMM socket in the POSIFLEX HS-2410W JIVA; no heat spreader is present so clearance is minimal.
How is the module installed and what step is often missed?
Power off the unit, open the memory cover, align the key notch on the 204-pin edge connector, insert at an angle, then press down until both retention clips click.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
