Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green 204-pin DDR3 SODIMM module, no heat spreader, black chips on PCB

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HS-2410W JIVA memory upgrade

SKU CH-1WEV-BN4VT

A 4 GB DDR3 SODIMM module rated at 1333 MHz for POSIFLEX HS-2410W JIVA systems

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HS-2410W JIVA POS systems
  • 4GB DDR3 1333MHz CL9 for responsive operation
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM fits compatible POSIFLEX motherboards
  • Built with major OEM chips for reliability

POSIFLEX JIVA POS Memory Upgrade

This 4GB DDR3 1333 SODIMM is built specifically for the POSIFLEX HS-2410W JIVA desktop point-of-sale system. It installs as a single 204-pin module to increase the memory available for POS applications.

Suits maintainers of this exact terminal

Technicians servicing the HS-2410W JIVA can use this non-ECC unbuffered stick to restore or expand system memory. It is not intended for laptops, standard desktops or any other POS hardware that requires a different pin count, voltage or form factor.

2Rx8 dual-rank organisation at CL9

The module uses a 2Rx8 chip arrangement with CAS latency 9, which determines how the HS-2410W memory controller accesses the 4GB capacity. Verify that the system BIOS recognises this rank configuration before purchase.

Høydepunkter

  • Designed for POSIFLEX HS-2410W JIVA POS systems
  • 4GB DDR3 1333MHz CL9 for responsive operation
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM fits compatible POSIFLEX motherboards
  • Built with major OEM chips for reliability

Spesifikasjoner

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spørsmål om denne varen

Does the DDR3 1333 PC3-10600 interface limit practical throughput?

The module runs at DDR3 1333 with a PC3-10600 rating and CL9 latency; actual throughput depends on the POSIFLEX HS-2410W JIVA memory controller.

What physical slot and form factor does this 204-pin SODIMM require?

It fits a standard 204-pin DDR3 SODIMM socket in the POSIFLEX HS-2410W JIVA; no heat spreader is present so clearance is minimal.

How is the module installed and what step is often missed?

Power off the unit, open the memory cover, align the key notch on the 204-pin edge connector, insert at an angle, then press down until both retention clips click.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.