Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-JYER-GCD9F

A 64 GB DDR5 kit of four 16 GB registered ECC RDIMMs at 4800 MT/s with CL40 latency and 1.1 V operation, validated for the Supermicro H14DSG-OM motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC RDIMM prevents data errors under load
  • 288-pin form factor matches Supermicro H14DSG-OM slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability

Exact-match upgrade for Supermicro H14DSG-OM

This 64GB kit contains four 16GB DDR5 RDIMMs rated at 4800MHz with CL40 latency and 1.1V operation. It is built for administrators who need the precise rank, voltage and timing the server memory controller expects so the full capacity is recognised and runs at rated speed.

Registered ECC limits for full population

Registered architecture offloads the memory controller, allowing every slot to be populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is mandatory for this board; UDIMM or SODIMM modules will not fit or function.

1Rx8 rank decides compatibility

Each module uses a single-rank 1Rx8 organisation that matches the motherboard population rules. Verify your system manual for supported capacities and approved DIMM installation order before purchase.

Öne çıkanlar

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC RDIMM prevents data errors under load
  • 288-pin form factor matches Supermicro H14DSG-OM slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability

Teknik özellikler

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Bu modelin diğer sürümleri

Aynı seriden 5 tane daha

Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.

Bu ürünle ilgili sorular

Should I choose the 4x16GB kit or a different capacity for my H14DSG-OM?

The 4x16GB kit fills four slots with 64GB total, matching the board's registered DIMM population rules for full-capacity operation.

What does the DDR5-4800 speed deliver once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for rated throughput.

How does the 288-pin RDIMM interface limit what I can install?

The board requires 288-pin registered DIMMs; unbuffered UDIMMs or SODIMMs will not fit or function in these slots.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.