Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Four green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-JYER-GCD9F

A 64 GB DDR5 kit of four 16 GB registered ECC RDIMMs at 4800 MT/s with CL40 latency and 1.1 V operation, validated for the Supermicro H14DSG-OM motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Visa 30 fler konfigurationer
  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC RDIMM prevents data errors under load
  • 288-pin form factor matches Supermicro H14DSG-OM slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability

Exact-match upgrade for Supermicro H14DSG-OM

This 64GB kit contains four 16GB DDR5 RDIMMs rated at 4800MHz with CL40 latency and 1.1V operation. It is built for administrators who need the precise rank, voltage and timing the server memory controller expects so the full capacity is recognised and runs at rated speed.

Registered ECC limits for full population

Registered architecture offloads the memory controller, allowing every slot to be populated at full capacity while ECC corrects single-bit errors on the fly. The 288-pin RDIMM form factor is mandatory for this board; UDIMM or SODIMM modules will not fit or function.

1Rx8 rank decides compatibility

Each module uses a single-rank 1Rx8 organisation that matches the motherboard population rules. Verify your system manual for supported capacities and approved DIMM installation order before purchase.

I korthet

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed with CL40 latency at 1.10 V
  • Registered ECC RDIMM prevents data errors under load
  • 288-pin form factor matches Supermicro H14DSG-OM slots
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Should I choose the 4x16GB kit or a different capacity for my H14DSG-OM?

The 4x16GB kit fills four slots with 64GB total, matching the board's registered DIMM population rules for full-capacity operation.

What does the DDR5-4800 speed deliver once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for rated throughput.

How does the 288-pin RDIMM interface limit what I can install?

The board requires 288-pin registered DIMMs; unbuffered UDIMMs or SODIMMs will not fit or function in these slots.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.