SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391,99
0.00497696BTC
Stokta
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro SYS-211SE memory upgrade
64 GB DDR5-4800 ECC RDIMM kit of four 16 GB modules for SuperMicro SYS-211SE servers
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 for server workloads
- ECC registered RDIMM design protects data integrity
- Low 1.10 V operation reduces power draw
- Validated for SuperMicro SYS-211SE systems
SuperMicro SYS-211SE DDR5 upgrade
This 64GB kit contains four 16GB DDR5 4800 ECC registered DIMMs built for the SuperMicro IoT SuperServer SYS-211SE series. It targets administrators who need to expand memory capacity on these specific 1U platforms while maintaining error correction and registered signalling. The modules run at 1.1V with CL40 latency and use a 1Rx8 organisation on major OEM DRAM.
Replaces lower-capacity or non-ECC DDR5 DIMMs
The jump is worth it when workloads exceed the capacity of the factory-installed memory or when the system currently runs unbuffered non-ECC modules that lack error detection. Adding four registered DIMMs fills all four slots in the SYS-211SE chassis and enables the platform's full ECC capability for data integrity. Systems already populated with matching registered ECC DDR5 at the same speed will not see a functional upgrade.
DDR5 4800 registered ECC constraints
Registered DIMMs require a motherboard chipset and CPU memory controller that support registered signalling and ECC; the SYS-211SE platform provides this, but consumer desktop boards do not. Mixing registered with unbuffered DIMMs will prevent boot, so all slots must use registered modules. The 4800 MT/s speed is the baseline DDR5 data rate; faster DDR5 DIMMs will downclock to 4800 when installed in this server.
Öne çıkanlar
- 64 GB total capacity across four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 for server workloads
- ECC registered RDIMM design protects data integrity
- Low 1.10 V operation reduces power draw
- Validated for SuperMicro SYS-211SE systems
Teknik özellikler
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Bu ürünle ilgili sorular
Does the 288-pin DDR5 RDIMM form factor fit the SuperMicro SYS-211SE server memory slots?
Yes, each 16 GB module is a 288-pin DDR5 RDIMM designed for the SuperMicro SYS-211SE-31D, SYS-211SE-31A and X31SEED-F platforms.
What is the correct order for populating the four 1Rx8 modules during installation?
Install all four 1Rx8 modules in the channel sequence shown in the SuperMicro SYS-211SE manual to enable proper registered ECC operation.
When should the registered ECC RDIMM kit be replaced if error counts rise?
Replace modules if the system logs uncorrectable ECC errors or persistent correctable error thresholds are exceeded during sustained 4800 MT/s operation.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
